Measurement traceability is a central principle of modern metrology. It ensures that a measurement result can be related to an appropriate reference through a documented chain of calibrations. The reference may be a realization of an SI unit, a national measurement standard, a certified reference material or another suitable reference. Each calibration in the chain establishes a relationship between a measuring system and a higher-level reference. Uncertainty is evaluated at every stage, and the uncertainty contributions are considered when the final measurement result is assessed. Traceability is not simply the ownership of a calibrated instrument or the presence of a certificate. It is a property of a particular measurement result and requires a clearly identified measurand, a suitable reference, a documented calibration chain and appropriate uncertainty information. A traceability chain may begin with a primary realization of an SI unit and continue through a national metrology institute, a calibration laboratory, an industrial reference standard and a working instrument. However, not every measurement requires a direct connection to an SI unit. For example, some biological, chemical or conventional measurement procedures may use internationally accepted reference systems or certified reference materials. Traceability must therefore be appropriate to the measurand and measurement purpose. International comparisons help establish confidence that national standards are consistent. The CIPM Mutual Recognition Arrangement supports recognition of national measurement standards and calibration and measurement capabilities. Accreditation can provide evidence of laboratory competence within a defined scope, but accreditation alone does not automatically make every result traceable. The actual result must satisfy the traceability requirements.
Measurement Traceability and the International Traceability Chain
Metrological traceability connects a measurement result to a stated reference through a documented and unbroken chain of calibrations, with each link contributing to measurement uncertainty. It allows measurement results to be compared with recognized standards and supports confidence in scientific, industrial and regulatory measurements.
A simplified uncertainty model for independent calibration links is u²_chain = Σuᵢ². This root-sum-of-squares model is valid only when the relevant contributions are independent and appropriately expressed at the final measurement level.
Explanation
Variables
| Symbol | Meaning | Si Unit |
|---|---|---|
u_chain | Combined uncertainty associated with the simplified calibration chain | Same unit as the final measurement quantity |
uᵢ | Uncertainty contribution from calibration link i, expressed at a compatible level | Same unit as the final measurement quantity |
n | Number of uncertainty contributions or calibration links | Dimensionless count |
Example or application
A worked example has not yet been added.
Definition
Metrological traceability is the property of a measurement result whereby the result can be related to a reference through a documented unbroken chain of calibrations, each contributing to measurement uncertainty.
Purpose
To establish a documented relationship between measurement results and recognized references, enabling comparability and confidence across laboratories, industries and countries.
Importance
Traceability is fundamental to international measurement comparability, scientific reproducibility, industrial quality assurance, calibration services and regulatory conformity.
Traceability Chain Structure
| Level | Description |
|---|---|
SI unit realization or recognized reference | The highest-level realization or reference appropriate to the measurand. |
National measurement standard | A national reference maintained by a national metrology institute or designated institute. |
Reference standard | A standard calibrated against a higher-level reference and maintained by a calibration laboratory. |
Working standard | A standard used for routine calibration or verification. |
Measuring instrument | The instrument used to obtain the measurement result. |
Measurement result | The reported result supported by the relevant calibration records, uncertainty evaluation and measurement procedure. |
Essential Elements Of Traceability
| Element | Description |
|---|---|
Defined measurand | The quantity being measured must be clearly identified, including relevant conditions. |
Appropriate reference | The reference must be suitable for the quantity and intended measurement. |
Documented calibration chain | Each relevant calibration link must be supported by appropriate records. |
Measurement uncertainty | Uncertainty contributions from the chain must be evaluated and considered. |
Competent calibration activities | Calibration procedures and laboratories must be technically suitable for the relevant measurements. |
Measurement procedure | The result must be obtained using a documented and appropriate method. |
Traceability And Accreditation
Traceability
Demonstrates the relationship between a particular measurement result and a stated reference.
Accreditation
Provides formal recognition that a laboratory is competent to perform specified activities within an accredited scope.
Relationship
Accreditation can support confidence in calibration and testing services, but traceability must still be demonstrated for the relevant measurement result.
Scope
A laboratory's accreditation applies only to activities and measurement capabilities included within its defined scope.
International Traceability Infrastructure
BIPM
Coordinates international metrology and supports the worldwide consistency of SI units.
National Metrology Institutes
Maintain national standards and provide high-level calibration and measurement services.
CIPMMRA
Provides an international framework for mutual recognition of national measurement standards and calibration and measurement capabilities.
Key Comparisons
International and regional comparisons provide evidence that measurement standards maintained by different institutes are consistent within stated uncertainties.
Worked Example
Problem
An industrial laboratory measures the mass of a product using a balance calibrated by an accredited calibration laboratory.
Chain
The balance is calibrated using a laboratory reference weight.
The reference weight has a calibration record connected to a national mass standard.
The national standard is maintained within the international measurement system.
The balance calibration provides corrections and uncertainty information.
The industrial laboratory uses the calibrated balance under defined conditions.
Result
The mass measurement can be supported by a documented traceability chain when the reference, calibrations, uncertainty contributions and measurement procedure are appropriate.
Interpretation
Traceability belongs to the measurement result and its documented chain, not merely to the balance as an object.
Maintaining Traceability
Use appropriate reference standards.
Maintain current calibration records.
Check calibration validity and instrument condition.
Document corrections and uncertainty contributions.
Perform intermediate checks where appropriate.
Control environmental and operational conditions.
Use suitable measurement procedures.
Review traceability whenever standards, methods or equipment change.
Limitations And Misconceptions
Traceability does not mean that a measurement is error-free.
Traceability does not guarantee that uncertainty is small enough for a particular application.
A calibration certificate alone does not automatically prove traceability to every possible reference.
An accredited laboratory's scope must cover the relevant measurement activity.
Traceability is not established simply by listing a chain of instrument serial numbers.
A measurement result must be connected to a reference appropriate to its measurand.
Applications
International scientific comparisons
Industrial calibration
Laboratory testing
Pharmaceutical measurements
Environmental monitoring
Legal metrology
Manufacturing quality assurance
Reference
JCGM 200, International Vocabulary of Metrology (VIM).
BIPM, CIPM Mutual Recognition Arrangement (CIPM MRA).
ISO/IEC 17025:2017, General Requirements for the Competence of Testing and Calibration Laboratories.
ILAC P10, ILAC Policy on Metrological Traceability of Measurement Results.
Related Topic
SCI-REF-003-091
SCI-REF-003-092
SCI-REF-003-093
SCI-REF-003-095
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Units & Measurement