✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-006-048

Electricity and Magnetism: Charge, Current, Voltage and Field Symbols

Explains the symbols and conventions used in electrostatics, electric circuits, and magnetism. It covers electric charge, current, potential difference, resistance, electric and magnetic fields, capacitance, magnetic flux, and electromagnetic induction.

  • I = dQ/dt

  • V = W/q

  • V = IR

  • 𝐅 = q(𝐄 + 𝐯 × 𝐁)

  • 𝐄 = 𝐅/q (for a test charge)

  • Φ_B = ∫𝐁 · d𝐀

  • ℰ = −dΦ_B/dt

  • C = Q/V

  • U_C = ½CV²

Explanation

Electricity and magnetism describe the behaviour of electric charges, currents, and electromagnetic fields. Electric charge is represented by q or Q and measured in coulombs (C). The symbol e represents the elementary charge magnitude, approximately 1.602176634 × 10⁻¹⁹ C. Electric current is represented by I and is the rate of charge flow through a surface. Potential difference or voltage is represented by V or ΔV and measured in volts. Resistance is represented by R and measured in ohms (Ω), while conductance is represented by G and measured in siemens (S). An electric field is represented by 𝐄 and measured in newtons per coulomb or volts per metre. Magnetic flux density is represented by 𝐁 and measured in teslas (T), while magnetic field strength is often represented by 𝐇 and measured in amperes per metre. These field quantities are related but are not interchangeable. Capacitance is represented by C and measured in farads (F), while inductance is represented by L and measured in henries (H). Electric flux is commonly represented by Φ_E and magnetic flux by Φ_B. Faraday's law relates changing magnetic flux through a circuit to induced electromotive force, often represented by ℰ. Because E may mean electric field or energy, V may mean voltage or volume, and C may mean capacitance or coulomb as a unit symbol, every quantity must be interpreted using its context and typography. Circuit diagrams also use standardized graphical symbols for components; those graphical symbols are distinct from algebraic quantity symbols.

Variables

SymbolMeaningUnit

q, Q

Electric charge

coulomb (C)

e

Elementary charge magnitude

coulomb (C)

I

Electric current

ampere (A)

V

Electric potential or potential difference

volt (V)

R

Electrical resistance

ohm (Ω)

G

Electrical conductance

siemens (S)

𝐄

Electric field

N C⁻¹ or V m⁻¹

𝐁

Magnetic flux density

tesla (T)

𝐇

Magnetic field strength

A m⁻¹

C

Capacitance

farad (F)

L

Inductance

henry (H)

Φ_B

Magnetic flux

weber (Wb)

ℰ

Electromotive force

volt (V)

Example or application

A worked example has not yet been added.

Definition

Electromagnetic symbols are conventional representations of electric charge, current, potential difference, resistance, electric and magnetic fields, and the properties of electrical and magnetic systems.

Purpose

To establish consistent notation for analysing electric charges, electrical circuits, electric and magnetic fields, and electromagnetic induction.

Importance

Electromagnetic notation is essential in circuit design, electrical engineering, power systems, electronics, telecommunications, electromagnetism, and modern technology.

Notation Conventions

  • Use q or Q for electric charge and I for conventional electric current.

  • Use V for electric potential or voltage and define whether a symbol represents a potential at a point or a potential difference.

  • Use R for resistance and G for conductance.

  • Use bold or arrow notation for vector fields 𝐄, 𝐁, and 𝐇.

  • Distinguish magnetic flux density 𝐁 from magnetic field strength 𝐇.

  • Use Φ_B for magnetic flux and Φ_E for electric flux when both occur.

  • Use ℰ for electromotive force to distinguish it from the electric field E.

  • Use C for capacitance only when it cannot be confused with the coulomb unit symbol or another defined quantity.

Worked Examples

ExampleExpressionExplanation

Electric current

ΔQ = 12 C, Δt = 3 s; I_avg = 4 A

Average current is the amount of charge passing a cross-section per unit time.

Ohm's law

I = 2 A, R = 5 Ω; V = IR = 10 V

For an ohmic component under the applicable conditions, voltage is proportional to current.

Capacitor charge

C = 10 μF, V = 5 V; Q = CV = 50 μC

For an ideal capacitor, stored charge is proportional to capacitance and potential difference.

Common Errors

  • Confusing the electric field E with energy E.

  • Treating magnetic flux density B and magnetic field strength H as identical.

  • Confusing the unit coulomb C with the quantity symbol for capacitance C.

  • Using voltage and electromotive force as though they always describe precisely the same physical situation.

  • Ignoring vector direction in Lorentz-force and field equations.

Reference

  • OpenStax, University Physics Volume 2, Electric Charge and Electric Fields

  • OpenStax, University Physics Volume 2, Electric Current and Direct-Current Circuits

  • OpenStax, University Physics Volume 2, Magnetism and Electromagnetic Induction

  • BIPM, The International System of Units (SI Brochure)

Related Topic

  • Electric Circuits

  • Electrostatics

  • Magnetic Fields and Electromagnetic Induction

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Symbols & Notation