Structural geology studies the deformation, orientation and spatial relationships of rocks and geological structures. Its notation allows geologists to record three-dimensional structures on two-dimensional maps, field notebooks, cross-sections and stereographic projections.
Strike is the compass direction of the horizontal line contained in an inclined planar surface. It is commonly reported as an azimuth measured clockwise from geographic or grid north, depending on the stated reference. Dip is the maximum angle at which a planar surface inclines downward from the horizontal, measured perpendicular to strike. Dip direction is the compass direction toward which the plane descends. Strike and dip together define the orientation of a planar geological feature such as bedding, foliation, cleavage or a fault surface.
A strike-and-dip symbol commonly consists of a long line representing strike and a shorter perpendicular tick indicating dip direction. The dip angle may be written beside the symbol. Map conventions differ, so the legend must be consulted. Horizontal beds, vertical beds and overturned beds may have distinct symbols.
Linear structures are described using trend and plunge. Trend is the compass direction of the horizontal projection of a line, while plunge is the angle at which the line inclines downward from the horizontal. Examples include fold axes, mineral lineations, stretching lineations and intersection lineations. A line's orientation can be represented by trend/plunge notation, with the order and formatting stated explicitly.
Faults are fractures or zones of fractures along which relative displacement has occurred. Their notation identifies the fault trace, movement direction, fault type and, where known, the sense of displacement. Normal faults involve relative downward movement of the hanging wall; reverse faults involve relative upward movement of the hanging wall. A thrust fault is a low-angle reverse fault. Strike-slip faults involve predominantly horizontal displacement and may be described as dextral or sinistral according to the relative movement direction.
Folds are bends in originally planar geological layers or surfaces. Anticlines and synclines are commonly identified by their geometry and stratigraphic relationships. In a simple upright anticline, older rocks generally occur in the core, while in a simple upright syncline, younger rocks generally occur in the core. Fold-axis notation may indicate axial traces, hinge lines, plunge directions and axial-plane orientation. These relationships can become more complex in overturned, recumbent or strongly deformed structures.
Stereographic projection converts three-dimensional orientations into two-dimensional diagrams. Great circles represent planes and points represent lines or poles to planes, depending on the projection method. Equal-area and equal-angle projections are both used in structural geology. The choice of projection affects how angular relationships and densities are represented.
Structural Geology: Strike, Dip, Fault and Fold Notation
Structural geology notation describes the orientation, geometry and movement of geological structures such as bedding, foliation, joints, faults and folds. Its main conventions include strike-and-dip symbols, dip direction, trend and plunge, fault movement indicators, fold-axis symbols and stereographic representations.
For a planar feature, orientation may be represented as:
Strike / Dip
For a linear feature:
Trend / Plunge
For a plane dipping at angle δ, the dip angle is measured from the horizontal and is perpendicular to the strike direction.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
δ | Dip angle | Degree (°) |
α | A strike azimuth in some notation systems | Degree (°) |
β | A trend azimuth in some notation systems | Degree (°) |
φ | A plunge angle in some notation systems | Degree (°) |
θ | A general orientation or angular parameter, defined by context | Degree (°) |
N | North reference direction | Direction |
Example or application
A worked example has not yet been added.
Definition
Structural geological notation is the system of symbols, angles, directions and graphical conventions used to represent the orientation, geometry and displacement of geological planes, lines, faults and folds.
Purpose
To communicate the three-dimensional orientation and deformation of geological structures using standardized measurements and map symbols.
Importance
Structural notation is essential for reconstructing tectonic history, evaluating fault geometry, interpreting folds, assessing slope stability, locating geological resources and understanding the arrangement of rock bodies below Earth's surface.
Planar Structure Notation
| Feature | Description | Measurement |
|---|---|---|
Strike | The azimuth of the horizontal line within a planar surface. | A compass direction or azimuth measured relative to a stated north reference. |
Dip | The maximum inclination of a plane from the horizontal. | An angle from 0° to 90° for ordinary planar orientation descriptions. |
Dip direction | The compass direction toward which a plane slopes downward. | An azimuth. |
Bedding | The planar arrangement of sedimentary layers. | Commonly recorded using strike and dip. |
Foliation | A planar fabric produced by mineral alignment, segregation or deformation. | Commonly recorded using strike and dip. |
Cleavage | A planar tendency of rocks to split along preferred surfaces. | Commonly recorded using strike and dip. |
Linear Structure Notation
| Feature | Description |
|---|---|
Trend | The azimuth of the horizontal projection of a linear feature. |
Plunge | The downward angle of a linear feature measured from the horizontal. |
Fold axis | A line along the hinge region of a fold, commonly represented by trend and plunge. |
Lineation | A linear fabric or alignment of geological features. |
Intersection lineation | A line formed by the intersection of two planar surfaces. |
Fault Notation
| Fault Type | Movement | Tectonic Context |
|---|---|---|
Normal fault | The hanging wall moves downward relative to the footwall. | Commonly associated with crustal extension. |
Reverse fault | The hanging wall moves upward relative to the footwall. | Commonly associated with crustal shortening. |
Thrust fault | A reverse fault with relatively low-angle geometry. | Commonly associated with compressional mountain-building processes. |
Dextral strike-slip fault | The opposite block appears displaced to the right when viewed across the fault. | Predominantly horizontal shear. |
Sinistral strike-slip fault | The opposite block appears displaced to the left when viewed across the fault. | Predominantly horizontal shear. |
Oblique-slip fault | Displacement includes both dip-slip and strike-slip components. | Combined vertical and horizontal movement. |
Fold Notation
| Term | Meaning |
|---|---|
Anticline | An arch-like fold in which the limbs generally dip away from the hinge region; in a simple upright fold, older rocks commonly occupy the core. |
Syncline | A trough-like fold in which the limbs generally dip toward the hinge region; in a simple upright fold, younger rocks commonly occupy the core. |
Monocline | A step-like bend in otherwise relatively horizontal or gently inclined strata. |
Overturned fold | A fold in which one limb has been rotated beyond vertical so that both limbs may dip in the same general direction. |
Recumbent fold | A fold with a nearly horizontal axial surface. |
Fold hinge | The region of maximum curvature of a folded surface. |
Axial plane | A surface connecting hinge lines of successive folded layers. |
Orientation Examples
| Notation | Interpretation |
|---|---|
045° / 30° SE | An illustrative strike-and-dip description: strike azimuth 045°, dip angle 30°, dipping toward the southeast. The exact convention must be specified. |
120° / 25° | An illustrative trend/plunge description: a linear feature trends 120° and plunges 25°. |
0° dip | A horizontal planar surface. |
90° dip | A vertical planar surface. |
Stereographic Notation
Description
Stereographic projections represent the orientation of planes and lines on a circular two-dimensional plot.
Common Elements
| Term | Meaning |
|---|---|
Great circle | The projected trace of a plane on the reference sphere. |
Pole to a plane | A point representing the direction perpendicular to a plane. |
Lineation point | A point representing the orientation of a linear feature. |
Equal-area projection | A projection that preserves area relationships, useful for orientation-density analysis. |
Equal-angle projection | A projection that preserves angular relationships locally. |
Measurement Conventions
State whether azimuths are measured from true north, magnetic north or grid north.
Specify whether the strike convention follows the right-hand rule or another convention.
Record dip direction explicitly when the notation does not make it unambiguous.
Distinguish a planar measurement from a linear measurement.
Include measurement uncertainty when it is significant.
Use the map legend to interpret fault and fold symbols.
Common Errors
Confusing strike with dip direction.
Measuring dip parallel to strike rather than perpendicular to it.
Reporting trend and plunge in the wrong order.
Confusing a fault trace with the direction of displacement.
Assuming all anticlines contain older rocks in their cores, including complex or overturned structures.
Failing to identify the north reference used for azimuth measurements.
Applications
Tectonic and structural geological mapping.
Fault and fold analysis.
Engineering geology and slope stability assessment.
Petroleum reservoir and mineral deposit studies.
Earthquake fault characterization.
Three-dimensional geological modelling.
Reference
Fossen, Structural Geology
US Geological Survey, geologic map symbols
International Union of Geological Sciences geological mapping conventions
Lisle, Geological Structures and Maps
Related Topic
SCI-REF-006-081
SCI-REF-006-082
SCI-REF-006-084
SCI-REF-006-090
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Scientific Symbols & Notation