Seismology is the study of earthquakes and the propagation of elastic waves through Earth. Its notation provides a common framework for describing earthquake location, source characteristics, wave arrivals, ground motion and the structure of Earth's interior.
An earthquake begins at a subsurface location called the hypocentre or focus. The point on Earth's surface directly above the hypocentre is the epicentre. Hypocentral depth is measured vertically or according to the stated location model, while epicentral distance is the surface distance between a station and the epicentre. Earthquake location is commonly reported using latitude, longitude and depth.
Seismic waves are classified into body waves and surface waves. Primary waves, or P waves, are compressional waves in which particle motion is generally parallel to the direction of propagation. Secondary waves, or S waves, are shear waves in which particle motion is generally perpendicular to propagation. S waves do not propagate through an ideal fluid because fluids cannot sustain static shear stress. Surface waves travel along or near Earth's surface and include Love and Rayleigh waves. Their motion and propagation characteristics differ from those of body waves.
Seismograms record ground motion as a function of time. Depending on the instrument and processing, a record may show displacement, ground velocity or ground acceleration. Seismic stations identify wave arrivals, amplitudes, frequencies and durations. Travel-time curves relate the time taken by seismic waves to travel between an earthquake source and a recording station to the distance and the Earth's internal velocity structure.
Earthquake magnitude quantifies an aspect of earthquake source size. Several magnitude scales exist, including local magnitude Mₗ, body-wave magnitude mᵦ, surface-wave magnitude Mₛ and moment magnitude Mᵥ. Moment magnitude is based on seismic moment and is widely used for moderate to great earthquakes because it remains physically meaningful across a broad range of earthquake sizes. Magnitude is logarithmic; a one-unit increase corresponds to a tenfold increase in the measured amplitude under the relevant scale definition, but energy release does not increase by only a factor of ten.
Seismic moment M₀ measures the physical size of an earthquake source and is related to the rigidity of the rock, the area of the fault that slipped and the average slip. Moment magnitude is calculated from seismic moment using a logarithmic relationship. The units of M₀ are newton metres (N m), while magnitude is dimensionless.
Earthquake intensity describes the observed effects and damage at a particular location, rather than the overall source size. Intensity scales such as the Modified Mercalli Intensity scale use descriptive categories based on human observations, building effects and environmental changes. One earthquake has a single event magnitude estimate for a specified scale and method, but its experienced intensity varies from place to place.
Seismic notation also includes focal mechanisms, which describe the orientation and sense of faulting using a beach-ball diagram. The nodal planes, compressional quadrants and dilatational quadrants help infer whether an earthquake involved normal, reverse or strike-slip faulting. Seismic tomography uses wave-speed variations to investigate the internal structure of Earth.
Seismology: Earthquake Magnitude and Seismic Wave Symbols
Seismological notation represents earthquake sources, seismic wave types, ground motion, travel times, magnitude, intensity and the physical properties of Earth's interior. Important symbols include Mₗ, Mᵥ or Mᵥ-like magnitude notation depending on the scale, P, S and surface-wave labels, hypocentre, epicentre, displacement, velocity and acceleration.
Seismic moment:
M₀ = μAD
Moment magnitude (commonly used SI-based relationship):
Mᵥ = (2/3)[log₁₀(M₀) − 9.1]
where M₀ is expressed in N m.
The numerical constant depends on the adopted unit convention and magnitude definition.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
M₀ | Seismic moment | N m |
μ | Shear modulus or rigidity of the source rocks | Pa |
A | Area of the fault surface that slipped | m² |
D | Average displacement or slip on the fault | m |
Mᵥ | Moment magnitude | Dimensionless |
t | Time | s |
u | Ground displacement | m |
v | Ground particle velocity | m s⁻¹ |
a | Ground acceleration | m s⁻² |
Example or application
A worked example has not yet been added.
Definition
Seismological symbols and notation are the mathematical, graphical and abbreviated conventions used to describe earthquakes, seismic sources, wave propagation, ground motion, earthquake magnitude and intensity, and Earth's internal structure.
Purpose
To provide standardized representations of earthquake locations, source dimensions, seismic wave arrivals, ground motion, magnitude and intensity for seismic monitoring and research.
Importance
Seismological notation allows scientists to compare earthquakes, locate their sources, investigate Earth's interior, estimate seismic hazards and communicate the expected or observed effects of ground shaking.
Earthquake Location Notation
| Term | Symbol | Meaning | Unit |
|---|---|---|---|
Hypocentre | Focus | The subsurface point where earthquake rupture initiates. | |
Epicentre | Epicentre | The point on Earth's surface vertically above the hypocentre. | |
Focal depth | h | Depth of the hypocentre below the reference surface. | km or m |
Epicentral distance | Δ | Distance between an epicentre and a seismic station, often expressed as an angular distance in seismological travel-time analysis. | km or degree |
Origin time | t₀ | The estimated time at which earthquake rupture begins. | UTC date and time |
Seismic Wave Notation
| Symbol | Name | Description |
|---|---|---|
P | Primary wave | A compressional body wave with particle motion generally parallel to propagation direction. |
S | Secondary wave | A shear body wave with particle motion generally perpendicular to propagation direction. |
Pg | Crustal P phase | A P-wave phase travelling through crustal paths, with exact usage dependent on regional travel-time conventions. |
Pn | Refracted or head-wave P phase | A P-wave phase associated with propagation near or along the crust-mantle boundary in conventional regional seismology. |
Love | Love wave | A surface wave involving predominantly horizontal shear motion. |
Rayleigh | Rayleigh wave | A surface wave involving elliptical particle motion in a vertical plane. |
Magnitude Notation
| Symbol | Name | Description |
|---|---|---|
Mₗ | Local magnitude | A magnitude scale historically associated with the original Richter formulation and regional applications. |
mᵦ | Body-wave magnitude | A magnitude based on selected body-wave amplitudes and periods. |
Mₛ | Surface-wave magnitude | A magnitude based on surface-wave measurements. |
Mᵥ | Moment magnitude | A magnitude derived from seismic moment; modern notation commonly uses Mᵥ, although the exact symbol may vary by publication. |
M₀ | Seismic moment | A physical measure of earthquake source size. |
Magnitude Versus Intensity
| Concept | Meaning | Spatial Variation |
|---|---|---|
Magnitude | Quantifies earthquake source size using a defined magnitude scale. | An event magnitude is not a separate value for every observation location, although estimates may differ by scale or method. |
Intensity | Describes the effects and shaking experienced at a particular location. | Varies geographically with distance, local geology, building vulnerability and other conditions. |
Ground Motion Notation
| Symbol | Meaning | Unit |
|---|---|---|
u(t) | Ground displacement as a function of time. | m |
du/dt | Ground velocity. | m s⁻¹ |
d²u/dt² | Ground acceleration. | m s⁻² |
PGA | Peak ground acceleration, the maximum absolute acceleration during a recorded motion. | m s⁻² or g |
PGV | Peak ground velocity. | m s⁻¹ |
PGD | Peak ground displacement. | m |
Seismic Wave Relationships
| Expression | Meaning |
|---|---|
v = fλ | Wave speed equals frequency multiplied by wavelength. |
T = 1/f | Wave period is the reciprocal of frequency. |
M₀ = μAD | Seismic moment is the product of rigidity, slipped fault area and average slip. |
Worked Examples
| Expression | Values | Interpretation |
|---|---|---|
M₀ = μAD | μ = 30 GPa, A = 10⁶ m², D = 0.5 m | M₀ = 1.5 × 10¹⁶ N m, using the stated simplified source parameters. |
T = 1/f | f = 5 Hz | The period is 0.2 seconds. |
PGA = 0.2 g | The maximum recorded ground acceleration is 0.2 times standard gravitational acceleration. |
Common Errors
Confusing earthquake magnitude with intensity.
Treating the epicentre as the actual subsurface rupture initiation point.
Assuming magnitude is a linear scale.
Confusing seismic displacement with velocity or acceleration.
Assuming S waves travel through the liquid outer core as ordinary shear waves.
Using a magnitude conversion relationship without checking its scale and unit convention.
Applications
Earthquake monitoring and event catalogues.
Seismic hazard and risk assessment.
Earthquake source mechanism analysis.
Earth's internal structure and seismic tomography.
Structural engineering and ground-motion studies.
Tectonic plate and fault-system research.
Reference
US Geological Survey, Earthquake Glossary and magnitude information
IASPEI, International Seismological Centre and seismic phase nomenclature resources
Shearer, Introduction to Seismology
Aki and Richards, Quantitative Seismology
Related Topic
SCI-REF-006-081
SCI-REF-006-083
SCI-REF-006-090
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Scientific Symbols & Notation