Hydrology is the science of water occurrence, movement, distribution and properties within the Earth system. Its notation provides a framework for describing the water cycle, measuring river flow, analysing groundwater systems and quantifying exchanges between the atmosphere, land surface, oceans and subsurface.
The hydrological cycle describes the continuous movement of water through processes such as evaporation, transpiration, condensation, precipitation, infiltration, percolation, surface runoff, groundwater flow and stream discharge. Symbols identify the rates or amounts associated with these processes. The exact symbols can vary between textbooks and models, so every technical report should define its notation.
A catchment or drainage basin is an area from which water drains toward a common outlet. Precipitation falling within a catchment may be intercepted by vegetation, stored temporarily, infiltrated into soil, evaporated or converted into surface runoff. The water balance relates changes in storage to inputs and outputs. A simple catchment water balance includes precipitation, evapotranspiration, runoff and change in storage.
Stream discharge is the volume of water passing through a cross-section per unit time. It is commonly represented by Q and measured in cubic metres per second (m³ s⁻¹). For approximately uniform flow through a cross-section, discharge can be estimated as the product of mean flow velocity and cross-sectional area. More accurate field measurements may require subdividing the cross-section into segments and summing individual flow contributions.
Groundwater hydrology studies water stored and moving within saturated geological formations. An aquifer is a geological formation or unit that can store and transmit usable quantities of groundwater. An aquitard has relatively low hydraulic conductivity and restricts groundwater flow, while an aquiclude is a term historically used for a unit that transmits negligible water under the relevant conditions. An unconfined aquifer has a water table as its upper boundary; a confined aquifer is bounded by lower-permeability units and groundwater is under pressure.
Hydraulic head is the mechanical energy per unit weight of groundwater, commonly expressed as a length. For groundwater at a point, total hydraulic head is the sum of elevation head and pressure head, with velocity head usually negligible in ordinary porous-media groundwater flow. Groundwater flows from higher hydraulic head toward lower hydraulic head, subject to the geological structure and hydraulic properties of the medium.
Darcy's law describes flow through porous media under appropriate conditions. Specific discharge, also called Darcy flux, is proportional to hydraulic gradient and hydraulic conductivity. The average linear groundwater velocity differs from Darcy flux because water flows only through connected pore spaces; effective porosity is therefore important when estimating actual groundwater movement.
Hydrological notation also describes soil-water content, infiltration capacity, evapotranspiration, rainfall intensity, hydrographs and flood frequency. A hydrograph plots discharge against time. Its rising limb, peak discharge and recession limb reveal how a catchment responds to rainfall or snowmelt.
Hydrology: Water Cycle, Flow and Groundwater Symbols
Hydrological notation describes the movement, storage and distribution of water on, above and below Earth's surface. It includes symbols for precipitation, evaporation, evapotranspiration, infiltration, runoff, stream discharge, hydraulic head, groundwater flow, aquifers, porosity, permeability and water balance.
Catchment water balance:
P = ET + Q + ΔS
Darcy's law:
Q = −KA(dh/dl)
Discharge relationship for a cross-section:
Q = vA
The sign convention, control volume, time interval and definitions of fluxes must be stated.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
P | Precipitation input | mm or m over a stated period |
ET | Evapotranspiration | mm or m over a stated period |
Q | Stream or groundwater discharge, depending on context | m³ s⁻¹ |
ΔS | Change in water storage | mm, m or m³ |
K | Hydraulic conductivity | m s⁻¹ |
A | Flow cross-sectional area | m² |
h | Hydraulic head | m |
l | Distance along the flow direction | m |
v | Mean flow velocity | m s⁻¹ |
nₑ | Effective porosity | Dimensionless |
Example or application
A worked example has not yet been added.
Definition
Hydrological symbols and notation are the mathematical, graphical and abbreviated conventions used to represent water-cycle processes, surface-water flow, groundwater movement, storage, catchment water balance and hydrological measurements.
Purpose
To describe, measure and model the movement and storage of water in catchments, rivers, lakes, soils, aquifers and the wider hydrological cycle.
Importance
Hydrological notation is fundamental to water-resource management, flood prediction, drought assessment, groundwater protection, irrigation, drainage engineering and environmental impact studies.
Water Cycle Notation
| Process | Symbol | Description |
|---|---|---|
Precipitation | P | Water falling from the atmosphere as rain, snow, sleet or other forms. |
Evaporation | E | Transfer of liquid water into water vapour. |
Transpiration | Tᵣ or Tr | Water vapour released by plants; the symbol should be defined because T is also used for temperature. |
Evapotranspiration | ET | Combined water transfer through evaporation and plant transpiration. |
Infiltration | I | Entry of water from the ground surface into soil. |
Percolation | Pᵣ or defined notation | Downward movement of water through soil and geological materials. |
Surface runoff | R or Qₛ | Water flowing over the land surface toward channels or other receiving areas. |
Groundwater flow | Q₉ or Qg | Subsurface movement of groundwater through saturated geological materials. |
Storage change | ΔS | Change in water stored in a defined system during a specified interval. |
Surface Water Notation
| Symbol | Meaning | Unit |
|---|---|---|
Q | Stream discharge | m³ s⁻¹ |
A | Cross-sectional area of flowing water | m² |
v | Mean flow velocity | m s⁻¹ |
i | Rainfall intensity or hydraulic gradient, depending on context | mm h⁻¹ or dimensionless |
t | Time | s, min or h |
Qp | Peak discharge of a hydrograph | m³ s⁻¹ |
Groundwater Notation
| Term | Symbol | Meaning | Unit |
|---|---|---|---|
Aquifer | Aquifer unit or mapped hydrogeological code | A formation capable of storing and transmitting groundwater. | |
Water table | Water-table surface | The surface at which pore-water pressure is atmospheric in an unconfined aquifer. | |
Hydraulic head | h | Groundwater energy per unit weight, expressed as a length. | |
Hydraulic conductivity | K | A measure of a saturated porous material's ability to transmit water under a hydraulic gradient. | |
Transmissivity | T | The integrated hydraulic conductivity through the saturated thickness of an aquifer. | m² s⁻¹ |
Storage coefficient | S | The volume of water released from or taken into storage per unit aquifer area per unit change in hydraulic head. | Dimensionless |
Specific yield | Sᵧ | The fraction of bulk saturated material volume that drains under gravity. | |
Effective porosity | nₑ | The connected pore fraction contributing to fluid flow. |
Water Balance Components
| Component | Role |
|---|---|
Precipitation | Water input to the catchment. |
Evapotranspiration | Water loss to the atmosphere. |
Runoff | Water leaving the catchment through surface and channel flow, according to the defined balance. |
Storage change | Net change in water stored in soil, groundwater, lakes, reservoirs, snow and other defined stores. |
Imports and exports | Additional transfers that must be included where water crosses the chosen catchment boundary. |
Hydrological Equations
| Expression | Meaning |
|---|---|
Q = vA | Discharge equals mean velocity multiplied by cross-sectional area. |
Q = −KA(dh/dl) | Darcy's law for flow through a porous medium along a one-dimensional flow direction. |
vₐ = q/nₑ | Approximate average linear groundwater velocity, where q is Darcy flux and nₑ is effective porosity. |
P = ET + Q + ΔS | A simplified catchment water balance when precipitation is the only input and the defined output terms are complete. |
Worked Examples
| Expression | Values | Interpretation |
|---|---|---|
Q = vA | v = 2 m s⁻¹, A = 5 m² | Discharge is 10 m³ s⁻¹. |
P = ET + Q + ΔS | P = 1000 mm, ET = 600 mm, runoff depth = 250 mm | The remaining storage increase is 150 mm, assuming no other inputs or outputs. |
vₐ = q/nₑ | q = 0.001 m s⁻¹, nₑ = 0.25 | The estimated average linear groundwater velocity is 0.004 m s⁻¹. |
Common Errors
Confusing discharge with flow velocity.
Using hydraulic conductivity and transmissivity as interchangeable quantities.
Confusing total porosity with effective porosity.
Ignoring storage changes in a water balance.
Mixing water depth and water volume without accounting for catchment area.
Applying Darcy's law outside its appropriate porous-flow assumptions.
Applications
River-flow measurement and flood forecasting.
Groundwater resource assessment.
Aquifer contamination and transport studies.
Irrigation and drainage engineering.
Catchment water-balance analysis.
Drought monitoring and water-resource planning.
Reference
US Geological Survey, National Field Manual for the Collection of Water-Quality Data
Freeze and Cherry, Groundwater
Dingman, Physical Hydrology
World Meteorological Organization, Guide to Hydrological Practices
Related Topic
SCI-REF-006-081
SCI-REF-006-085
SCI-REF-006-086
SCI-REF-006-088
SCI-REF-006-089
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Scientific Symbols & Notation