✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-006-088

Oceanography: Marine Processes and Oceanographic Notation

Oceanographic notation represents seawater properties, ocean circulation, waves, tides, marine chemistry, bathymetry and interactions between the ocean and atmosphere. Important symbols include temperature, salinity, density, pressure, current velocity, sea-surface height, wave height, tidal constituents and chemical variables such as dissolved oxygen and pH.

Linear wave relationship:

c = λ/T = fλ

Hydrostatic pressure approximation:

p = ρgz

A simplified sea-level harmonic representation:

η(t) = η₀ + Σₙ Hₙ cos(ωₙt + φₙ)

The exact oceanographic equations depend on the physical regime, coordinate system and reference conventions.

Explanation

Oceanography is the interdisciplinary study of the physical, chemical, biological and geological characteristics of the ocean. Its notation allows scientists to measure seawater properties, describe circulation, represent waves and tides, investigate marine ecosystems and map the seafloor.

Physical oceanography uses symbols for temperature, salinity, density, pressure, velocity, acceleration, sea-surface height and ocean depth. Seawater temperature is commonly expressed in degrees Celsius, while pressure may be expressed in pascals, decibars or another declared unit. Oceanographic pressure is often reported in decibars because one decibar is approximately equivalent to the pressure increase associated with one metre of seawater depth under typical conditions, although the exact relationship depends on latitude and seawater properties.

Salinity describes the concentration of dissolved salts in seawater. Modern oceanography commonly uses Practical Salinity, denoted Sₚ, calculated using the Practical Salinity Scale 1978. Practical Salinity is dimensionless and is not strictly expressed in parts per thousand, even though the numerical values are often similar to traditional per-mille descriptions. Absolute Salinity, denoted Sₐ, is a mass fraction expressed in g kg⁻¹ under the TEOS-10 framework. These quantities should not be confused.

Seawater density depends on temperature, salinity and pressure. It is often represented by ρ and measured in kg m⁻³. Potential temperature and Conservative Temperature are used to compare water parcels after accounting for pressure-related thermodynamic effects. Potential density and related variables are important for identifying water-mass structure and ocean stratification.

Ocean circulation is driven by wind stress, density differences, tides, Earth's rotation and pressure gradients. Currents are represented as velocity vectors with eastward and northward components, often labelled u and v. A positive u component generally indicates eastward flow, while a positive v component generally indicates northward flow, provided the coordinate convention is defined. The Coriolis parameter f describes the influence of Earth's rotation on horizontal motion and varies with latitude.

Waves are described using height H, wavelength λ, period T and frequency f or ν. Wave height is the vertical distance between crest and trough, while amplitude is commonly half the wave height for a regular sinusoidal wave. Ocean wave notation distinguishes wave period from wave frequency and distinguishes significant wave height Hₛ from the height of an individual wave. Significant wave height is commonly defined as the average height of the highest one-third of waves in a record, and under many conditions is approximately four times the standard deviation of surface elevation.

Tides are periodic changes in sea level caused primarily by the gravitational effects of the Moon and Sun and the dynamics of ocean basins. Tidal analysis represents sea level as a sum of harmonic constituents, each with an amplitude and phase. Common constituents include M₂, S₂, K₁ and O₁. The subscript and letter identify astronomical frequencies associated with lunar and solar forcing.

Marine chemistry uses symbols for dissolved oxygen, nutrients, carbon dioxide, alkalinity, dissolved inorganic carbon, pH and carbonate-system variables. Oceanographic datasets should specify sampling depth, reference scale, calibration method, units and whether measurements represent in-situ, potential or standardized conditions.

Variables

SymbolMeaningUnit

T

Seawater temperature or wave period, depending on context

°C or K; s for wave period

Sₚ

Practical Salinity

Dimensionless

Sₐ

Absolute Salinity

g kg⁻¹

ρ

Seawater density

kg m⁻³

u, v

Eastward and northward current-velocity components under the usual local coordinate convention

m s⁻¹

H

Wave height

m

λ

Wavelength

m

η

Sea-surface elevation relative to a stated vertical datum

m

f

Frequency or Coriolis parameter, depending on context

Hz or s⁻¹

p

Pressure

Pa or dbar

Example or application

A worked example has not yet been added.

Definition

Oceanographic symbols and notation are the scientific, mathematical and graphical conventions used to represent seawater properties, ocean circulation, marine waves, tides, bathymetry, ocean chemistry and marine environmental processes.

Purpose

To provide consistent representations of seawater conditions, ocean motion, wave and tidal behaviour, marine chemistry and seafloor characteristics.

Importance

Oceanographic notation enables global ocean observations to be compared and interpreted. It supports climate research, navigation, coastal engineering, marine resource management, sea-level studies and understanding of ocean ecosystems.

Seawater Properties

PropertySymbolUnitDescription

In-situ temperature

t or T

°C

The temperature of seawater at its actual pressure and location.

Practical Salinity

Sₚ

Dimensionless

Salinity calculated according to the Practical Salinity Scale 1978.

Absolute Salinity

Sₐ

g kg⁻¹

A mass-fraction measure of seawater salt content used in TEOS-10.

Density

ρ

kg m⁻³

Mass per unit volume of seawater.

Potential temperature

θ

°C or K

The temperature a water parcel would have if moved adiabatically to a specified reference pressure.

Conservative Temperature

Θ

°C

A thermodynamic temperature variable used in TEOS-10.

Pressure

p

Pa or dbar

The pressure experienced by seawater.

Ocean Circulation Notation

SymbolMeaning

u

Eastward velocity component.

v

Northward velocity component.

w

Vertical velocity component.

f

Coriolis parameter, commonly expressed as f = 2Ω sin φ.

Ω

Earth's angular rotation rate.

φ

Geographic latitude in the Coriolis parameter expression.

η

Sea-surface elevation or displacement relative to a vertical reference.

τ

Stress, including wind stress when specified.

Wave Notation

SymbolMeaningUnit

H

Individual wave height, measured from trough to crest.

Hₛ

Significant wave height, commonly the mean height of the highest one-third of waves.

λ

Wavelength, the horizontal distance between corresponding points on successive waves.

T

Wave period, the time between successive corresponding wave phases.

f

Wave frequency, the number of cycles per second.

c

Wave phase speed.

m s⁻¹

a

Wave amplitude; for a regular symmetric wave, approximately half its height.

Tidal Notation

SymbolMeaning

M₂

Principal lunar semidiurnal tidal constituent.

S₂

Principal solar semidiurnal tidal constituent.

K₁

Lunar-solar diurnal tidal constituent.

O₁

Principal lunar diurnal tidal constituent.

η

Sea-level elevation relative to a stated datum.

Hₙ

Amplitude of the nth tidal harmonic constituent.

φₙ

Phase of the nth tidal harmonic constituent.

ωₙ

Angular frequency of the nth tidal constituent.

Marine Chemistry Notation

SymbolMeaning

DO

Dissolved oxygen concentration.

DIC

Dissolved inorganic carbon.

TA

Total alkalinity.

pH

Negative base-ten logarithm of hydrogen-ion activity.

NO₃⁻

Nitrate ion.

PO₄³⁻

Phosphate ion.

Si(OH)₄

Silicic acid, an important dissolved silicon species in seawater.

pCO₂

Partial pressure of carbon dioxide.

Bathymetric Notation

TermMeaningSymbol

Bathymetry

Measurement and representation of underwater depth and seafloor topography.

A contour connecting points of equal water depth.

Isobath

Sounding

A measured water depth at a particular position.

Chart datum

A vertical reference surface used for charted depths and tidal predictions.

Seafloor elevation

Vertical position relative to a specified reference surface; sign convention must be stated.

z

Oceanographic Equations

ExpressionMeaning

c = λ/T = fλ

Wave phase speed equals wavelength divided by period or frequency multiplied by wavelength.

p ≈ ρgz

Approximate hydrostatic pressure increase with depth for nearly constant density.

f = 2Ω sin φ

Coriolis parameter as a function of Earth's angular rotation rate and geographic latitude.

η(t) = η₀ + Σₙ Hₙ cos(ωₙt + φₙ)

A simplified harmonic representation of tidal sea-level variation.

Worked Examples

ExpressionValuesInterpretation

c = λ/T

λ = 100 m, T = 10 s

The wave phase speed is 10 m s⁻¹.

p ≈ ρgz

ρ = 1025 kg m⁻³, g = 9.81 m s⁻², z = 10 m

The approximate pressure increase is 100552.5 Pa, excluding atmospheric pressure.

Hₛ = 3 m

The average height of the highest one-third of waves in the analysed record is 3 metres.

Common Errors

  • Treating Practical Salinity as a quantity with a strict unit of ppt.

  • Confusing wave height with wave amplitude.

  • Confusing tidal height with water depth.

  • Reporting bathymetric depth without identifying the vertical datum.

  • Mixing in-situ temperature, potential temperature and Conservative Temperature.

  • Confusing the Coriolis parameter with wave frequency because both may use f.

Applications

  • Ocean circulation and climate research.

  • Marine navigation and bathymetric charting.

  • Coastal engineering and wave forecasting.

  • Tide prediction and sea-level monitoring.

  • Marine biogeochemistry and ocean acidification research.

  • Fisheries and marine ecosystem monitoring.

Reference

  • IOC, SCOR and IAPSO, The International Thermodynamic Equation of Seawater 2010 (TEOS-10)

  • UNESCO, International Oceanographic Data and Information Exchange resources

  • Stewart, Introduction to Physical Oceanography

  • Talley et al., Descriptive Physical Oceanography

Related Topic

  • SCI-REF-006-081

  • SCI-REF-006-086

  • SCI-REF-006-087

  • SCI-REF-006-089

  • SCI-REF-006-090

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Symbols & Notation