Soil science examines the formation, composition, physical properties, chemical processes and biological activity of soils. Environmental chemistry studies chemical substances and transformations in air, water, soil and living systems. Their notation is used to describe soil horizons, particle-size distributions, water content, density, acidity, nutrient status, chemical concentrations and pollutant behaviour.
Soil profiles are commonly divided into horizons identified by combinations of letters and numbers. Master horizons include O, A, E, B, C and R in widely used soil description systems. The O horizon is dominated by organic materials; A is a mineral surface horizon often containing organic matter; E is an eluvial horizon where materials have been removed; B is a subsurface horizon showing accumulation or alteration; C consists of relatively weakly altered parent material; and R represents consolidated bedrock. Not every soil profile contains every horizon, and horizon definitions are system-specific.
Soil texture describes the relative proportions of sand, silt and clay-sized particles. Particle-size limits depend on the classification system. The USDA system commonly defines sand as 0.05–2.0 mm, silt as 0.002–0.05 mm and clay as less than 0.002 mm. Texture classes such as sandy loam, loam and clay are assigned using a soil-texture triangle. The triangle's classification boundaries must be interpreted using the relevant system.
Soil water content may be represented by gravimetric water content or volumetric water content. Gravimetric water content is the mass of water divided by the mass of dry soil. Volumetric water content is the volume of water divided by the total bulk volume of soil. Bulk density is the dry mass of soil per unit bulk volume, while particle density is the density of the solid soil particles. Porosity is the fraction of total bulk volume occupied by pores.
Soil chemistry uses pH to describe acidity, electrical conductivity to estimate the ability of a soil solution or extract to conduct electrical current, cation-exchange capacity to represent the capacity of soil materials to retain and exchange positively charged ions, and organic matter content to describe the organic fraction. Nutrient symbols include N, P and K for nitrogen, phosphorus and potassium in agronomic contexts. These elemental symbols should not be confused with particular chemical species or oxidation states.
Environmental chemistry reports contaminant concentrations in air, water, soil and sediment. Units depend on the sample type and measurement basis. Water concentrations are often reported in mg L⁻¹ or μg L⁻¹, while soil and sediment concentrations are commonly reported in mg kg⁻¹ or μg kg⁻¹ on a stated dry- or wet-mass basis. Gas concentrations may be reported as volume or mole fractions, such as ppm or ppb, or as mass concentrations such as μg m⁻³.
Pollutant transport is described through advection, diffusion, dispersion, sorption, degradation, volatilization, precipitation and other processes. Concentration is not the same as total contaminant mass or contaminant load. A contaminant load is the mass transported per unit time and may be estimated from concentration and volumetric flow rate when units are consistent.
Environmental risk assessment uses exposure pathways, toxicity values, background concentrations, detection limits and regulatory criteria. Analytical results should identify the chemical species measured, sampling method, analytical method, detection or quantification limit, uncertainty and the relevant environmental matrix. A value below a detection limit does not necessarily mean that a substance is completely absent.
Soil Science, Environmental Chemistry and Pollution Symbols
Soil and environmental science notation represents soil composition, texture, water content, acidity, organic matter, nutrient availability, contaminant concentration, pollutant transport and environmental quality. Common symbols include pH, θ, ρb, K, C, c, EC, CEC, OM and chemical species or concentration units such as mg kg⁻¹ and μg L⁻¹.
Gravimetric water content:
w = (mwet − mdry)/mdry
Volumetric water content:
θᵥ = Vw/Vt
Bulk density:
ρb = mdry/Vt
Contaminant mass loading:
L = C Q
where concentration C and flow rate Q must use compatible units.
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
w | Gravimetric soil water content | kg kg⁻¹ or % |
θᵥ | Volumetric soil water content | m³ m⁻³ |
ρb | Soil bulk density | kg m⁻³ or g cm⁻³ |
ρp | Particle density | kg m⁻³ or g cm⁻³ |
n | Soil porosity | Dimensionless or % |
pH | Negative base-ten logarithm of hydrogen-ion activity | Dimensionless |
EC | Electrical conductivity | S m⁻¹ or dS m⁻¹ |
CEC | Cation-exchange capacity | cmol(c) kg⁻¹ |
C | Chemical concentration or carbon content, depending on context | Context-dependent |
L | Contaminant mass loading rate | Mass per time |
Example or application
A worked example has not yet been added.
Definition
Soil science and environmental chemistry symbols and notation are the mathematical, chemical and classification conventions used to describe soil properties, environmental media, chemical concentrations, nutrient status, contaminants and pollutant transport.
Purpose
To provide standardized ways of describing soil physical and chemical characteristics, environmental contaminant concentrations, nutrient availability and the movement of pollutants through natural systems.
Importance
These symbols support soil fertility assessment, agricultural management, environmental monitoring, contamination investigations, remediation design, water-quality protection and ecological risk assessment.
Soil Horizon Notation
| Symbol | Meaning |
|---|---|
O | Organic horizon dominated by organic material. |
A | Mineral surface horizon commonly containing organic matter. |
E | Eluvial horizon characterized by loss of materials such as clay, iron or aluminium under relevant soil-forming conditions. |
B | Subsurface horizon showing accumulation, transformation or other development. |
C | Relatively weakly altered parent material. |
R | Consolidated bedrock. |
Soil Physical Notation
| Symbol | Meaning | Typical USDAInterval |
|---|---|---|
Sand | Coarse mineral particle-size fraction. | 0.05–2.0 mm |
Silt | Intermediate mineral particle-size fraction. | 0.002–0.05 mm |
Clay | Fine mineral particle-size fraction. | Less than 0.002 mm |
ρb | Bulk density: dry soil mass divided by total bulk volume. | |
ρp | Particle density: mass of solid particles divided by the volume of those solids. | |
n | Porosity: fraction of bulk volume occupied by pores. | |
θᵥ | Volumetric water content. | |
w | Gravimetric water content. |
Soil Chemical Notation
| Symbol | Meaning |
|---|---|
pH | A measure related to hydrogen-ion activity and soil acidity or alkalinity. |
EC | Electrical conductivity, commonly used as an indicator of soluble-salt content. |
CEC | Cation-exchange capacity, the quantity of exchangeable cations a soil can retain under specified conditions. |
OM | Organic matter. |
SOC | Soil organic carbon. |
N | Nitrogen, commonly used as an elemental nutrient designation. |
P | Phosphorus, commonly used as an elemental nutrient designation. |
K | Potassium, commonly used as an elemental nutrient designation. |
Ca²⁺ | Calcium ion. |
Mg²⁺ | Magnesium ion. |
Na⁺ | Sodium ion. |
Environmental Concentration Notation
| Unit | Meaning |
|---|---|
mg L⁻¹ | Milligrams of a substance per litre of liquid sample. |
μg L⁻¹ | Micrograms of a substance per litre of liquid sample. |
mg kg⁻¹ | Milligrams of a substance per kilogram of sample, with the mass basis specified. |
μg kg⁻¹ | Micrograms of a substance per kilogram of sample, with the mass basis specified. |
μg m⁻³ | Micrograms of a substance per cubic metre of air. |
ppm | Parts per million; the basis must be specified, such as mass fraction or mole fraction. |
ppb | Parts per billion; the basis must be specified. |
mol L⁻¹ | Moles of a substance per litre of solution. |
Pollution And Environmental Chemistry Symbols
| Symbol | Meaning |
|---|---|
BOD | Biochemical oxygen demand, a measure of oxygen consumed by biological processes under a specified test. |
COD | Chemical oxygen demand, an operational measure of oxygen equivalent consumed in a specified chemical oxidation test. |
DO | Dissolved oxygen concentration. |
TDS | Total dissolved solids. |
TSS | Total suspended solids. |
NO₃⁻ | Nitrate ion. |
NH₄⁺ | Ammonium ion. |
PO₄³⁻ | Phosphate ion. |
Pb | Lead as an elemental designation; its chemical form must be specified where relevant. |
Hg | Mercury as an elemental designation; its chemical form must be specified where relevant. |
As | Arsenic as an elemental designation; its oxidation state and chemical species may affect toxicity. |
Pollutant Transport Notation
| Symbol | Meaning |
|---|---|
C | Concentration of a pollutant. |
Q | Volumetric flow rate. |
L | Mass loading rate. |
D | Diffusion or dispersion coefficient, depending on the model. |
v | Advective transport velocity. |
k | A rate constant for a specified transformation or degradation process. |
Koc | Organic-carbon-normalized partition coefficient for sorption to organic carbon. |
Kd | Distribution coefficient between a solid phase and a liquid phase under specified conditions. |
Soil And Environmental Equations
| Expression | Meaning |
|---|---|
w = (mwet − mdry)/mdry | Gravimetric water content based on wet and oven-dry soil masses. |
θᵥ = Vw/Vt | Volumetric water content as water volume divided by total soil volume. |
ρb = mdry/Vt | Bulk density based on dry soil mass and total bulk volume. |
n = 1 − ρb/ρp | Porosity estimated from bulk density and particle density when the soil is treated as a two-phase solid-pore system. |
L = C Q | Contaminant mass loading rate equals concentration multiplied by volumetric flow rate. |
Worked Examples
| Expression | Values | Interpretation |
|---|---|---|
w = (mwet − mdry)/mdry | mwet = 120 g, mdry = 100 g | Gravimetric water content is 0.20 kg kg⁻¹ or 20%. |
ρb = mdry/Vt | mdry = 1.3 kg, Vt = 0.001 m³ | Bulk density is 1300 kg m⁻³. |
L = C Q | C = 2 mg L⁻¹, Q = 1000 L s⁻¹ | The pollutant loading rate is 2000 mg s⁻¹, equivalent to 2 g s⁻¹. |
pH = 5.5 | The soil or solution is acidic under the measurement conditions. |
Common Errors
Confusing gravimetric and volumetric water content.
Using a concentration unit without specifying the sample mass or volume basis.
Treating ppm as universally equivalent to mg L⁻¹.
Confusing BOD with COD.
Treating total concentration as equivalent to bioavailable concentration.
Ignoring the chemical species and oxidation state of a contaminant.
Comparing soil pH measurements obtained using different extraction procedures without qualification.
Applications
Soil fertility and agricultural nutrient management.
Soil classification and land evaluation.
Groundwater and surface-water pollution monitoring.
Contaminated-site investigation and remediation.
Environmental impact assessment.
Industrial effluent and wastewater monitoring.
Ecological and human exposure assessment.
Reference
USDA, Soil Survey Manual
USDA Natural Resources Conservation Service, Keys to Soil Taxonomy
Sparks, Environmental Soil Chemistry
APHA, Standard Methods for the Examination of Water and Wastewater
ISO 11277, Soil quality: Determination of particle size distribution in mineral soil material
Related Topic
SCI-REF-006-081
SCI-REF-006-086
SCI-REF-006-087
SCI-REF-006-088
SCI-REF-006-090
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Scientific Symbols & Notation