✦ScienexySCIENCE KNOWLEDGE LIBRARY
reference · SCI-REF-006-096

Chemical Engineering: Process Flow and Equipment Symbols

Chemical engineering notation represents industrial process operations, equipment, material streams, energy flows, instrumentation, control systems, and process conditions. Process-flow diagrams and piping and instrumentation diagrams use standardized symbols and identifiers to communicate how a plant is arranged and operated.

General mass balance: Input − Output + Generation − Consumption = Accumulation. At steady state, accumulation = 0. For a nonreactive steady-state process: Σṁ_in = Σṁ_out. Sensible heat duty for constant heat capacity: Q̇ = ṁc_p(T_out − T_in). For an ideal-gas stream: PV = nRT.

Explanation

Chemical engineering diagrams describe the transformation of raw materials into products through physical, chemical, and biological processes. A block flow diagram presents major process stages, while a process-flow diagram (PFD) shows principal equipment, process streams, operating conditions, and material or energy relationships. A piping and instrumentation diagram (P&ID) provides more detailed information about piping, valves, instruments, control loops, safety devices, and equipment connections. Typical equipment symbols represent pumps, compressors, heat exchangers, reactors, distillation columns, vessels, tanks, filters, mixers, and separators. Process streams are represented by lines and flow arrows, with stream numbers linking diagram paths to stream tables. Instrumentation tags identify measured variables and control functions. Common letters represent process variables such as flow, temperature, pressure, and level, but their meanings and combinations must follow the relevant instrument-identification standard. For example, a flow transmitter, pressure indicator, or temperature controller is identified by a combination of functional letters and a loop number. Valve symbols distinguish different valve types and actuators. Equipment identifiers are often assigned sequentially within a plant area or process unit. Process calculations use mass-flow rate, molar-flow rate, composition, pressure, temperature, enthalpy, and energy-duty notation. Material and energy balances are fundamental to process design and operation. A PFD does not necessarily show every valve, fitting, instrument, or pipe detail; a P&ID provides a more detailed control and piping representation. Neither diagram should be assumed to be a complete construction isometric or fabrication drawing.

Variables

SymbolMeaningUnit

ṁ

Mass-flow rate.

kg·s⁻¹

ṅ

Molar-flow rate.

mol·s⁻¹

Q̇

Rate of heat transfer or thermal duty.

W

P

Pressure.

Pa

T

Absolute temperature.

K

V

Volume.

m³

c_p

Specific heat capacity at constant pressure.

J·kg⁻¹·K⁻¹

h

Specific enthalpy.

J·kg⁻¹

xᵢ

Mole fraction of component i in a liquid or mixture where defined.

Dimensionless

yᵢ

Mole fraction of component i in a gas mixture where defined.

Dimensionless

zᵢ

Overall mole fraction of component i in a feed or combined stream.

Dimensionless

R

Universal gas constant.

J·mol⁻¹·K⁻¹

Example or application

A worked example has not yet been added.

Definition

Chemical engineering process notation is the standardized graphical, alphanumeric, and mathematical language used to represent process equipment, material and energy streams, piping, instrumentation, control functions, and operating conditions in industrial process systems.

Purpose

To communicate process arrangement, equipment functions, stream connections, instrumentation, control strategies, and the material and energy behavior of chemical plants and industrial systems.

Importance

Process notation is essential for process design, plant operation, process safety, equipment selection, troubleshooting, hazard analysis, and coordination between chemical, mechanical, electrical, and instrumentation engineers. Accurate PFD and P&ID interpretation helps prevent incorrect connections, operating errors, and unsafe isolation or control conditions.

Process Diagram Types

DiagramContentPurpose

Block Flow Diagram (BFD)

Major process stages represented by blocks connected by material-flow arrows.

Communicates the overall process concept and major transformations.

Process Flow Diagram (PFD)

Major equipment, principal process streams, selected operating conditions, and process information.

Supports process design, material balances, energy balances, and equipment understanding.

Piping and Instrumentation Diagram (P&ID)

Detailed piping, valves, instruments, control loops, equipment connections, and safety-related devices.

Supports detailed engineering, construction, commissioning, operation, and maintenance.

Process Equipment Layout

Physical arrangement and spatial relationships of equipment.

Supports plant layout, access, maintenance planning, and construction coordination.

Process Isometric Drawing

Three-dimensional-style representation of piping geometry, dimensions, fittings, and elevations.

Supports piping fabrication and installation.

Equipment Symbols And Functions

EquipmentCommon TagDescription

Centrifugal pump

P

Transfers liquid by adding mechanical energy through a rotating impeller.

Compressor

C

Raises the pressure of a gas by mechanical work.

Heat exchanger

E or HE

Transfers heat between process streams without necessarily mixing them.

Reactor

R

Provides a controlled environment for chemical reaction.

Distillation column

T or C, depending on the project convention.

Separates mixture components through vapor-liquid contacting and differences in volatility.

Storage tank

TK

Stores liquid or other process material.

Filter

F

Separates suspended solids from a fluid stream.

Mixer

M

Combines or homogenizes process streams.

Separator

S

Separates phases or components using an appropriate physical principle.

Instrument Identification Notation

LetterMeaning

F

Flow as a measured or initiating variable.

P

Pressure.

T

Temperature.

L

Level.

I

Indication.

T

Transmitter when used in the applicable instrument-function position.

C

Controller.

A

Alarm when used in the applicable instrument-function position.

V

Valve or final control element in relevant tag conventions.

R

Recorder in relevant instrument-function conventions.

Instrument Tag Examples

TagMeaning

FT-101

Flow transmitter, loop 101.

PI-102

Pressure indicator, loop 102.

TIC-103

Temperature indicating controller, loop 103.

LIC-104

Level indicating controller, loop 104.

PSV-105

Pressure safety valve, with the exact tag interpretation governed by the project standard.

FCV-106

Flow control valve, loop 106.

Piping And Valve Notation

NotationMeaning

Line number

A unique or structured identifier for a process or utility line.

DN

Nominal pipe size designation in metric-based piping systems.

NPS

Nominal Pipe Size designation used in relevant piping systems.

CS

May denote carbon steel as a material abbreviation when defined in the project specification.

SS

May denote stainless steel when defined in the project specification.

NRV

Non-return valve or check valve.

MOV

Motor-operated valve.

XV

A project-defined on/off or actuated valve designation in many instrument-tagging systems.

HV

Often a hand-operated valve designation, subject to the project legend.

Worked Examples

ExampleGivenCalculationResultNotationExplanation

Steady-state mass balance

A nonreactive process receives 100 kg/h of feed and has no accumulation.

ṁ_in = ṁ_out

Total outlet mass-flow rate = 100 kg/h.

Heat exchanger duty

A stream flows at 2 kg/s, with c_p = 4.18 kJ·kg⁻¹·K⁻¹, and its temperature increases by 15 K.

Q̇ = ṁc_pΔT = 2 × 4.18 × 15

Heat duty = 125.4 kW, assuming constant heat capacity and neglecting other energy effects.

Instrument tag interpretation

A pressure-indicating controller associated with loop 201.

PIC-201

P identifies pressure as the measured variable, I indicates an indicating function, and C indicates a controller under the applicable instrument-identification convention.

Interpretation Rules

  • Use the PFD for major process understanding and the P&ID for detailed piping and instrumentation interpretation.

  • Read equipment and line tags together with equipment lists and line lists.

  • Check whether arrows indicate normal process flow, signal direction, or another relationship.

  • Do not assume that an instrument bubble alone defines its physical installation location.

  • Check valve fail position, actuator type, and control function in the relevant documentation.

  • Use the project legend because equipment tags and abbreviations may vary between facilities.

Reference

  • ISO 10628 series: Diagrams for the Chemical and Petrochemical Industry

  • ISO 14617 series: Graphical Symbols for Diagrams

  • ANSI/ISA-5.1: Instrumentation Symbols and Identification

  • Towler and Sinnott, Chemical Engineering Design

  • Felder, Rousseau and Bullard, Elementary Principles of Chemical Processes

Related Topic

  • SCI-REF-006-091

  • SCI-REF-006-092

  • SCI-REF-006-094

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Symbols & Notation