An SI derived unit is a unit expressed as a product of powers of SI base units. Derived units are used for quantities such as area, volume, velocity, acceleration, force, pressure, energy, power, electric charge, voltage, resistance, and frequency. Some derived units have special names and symbols to simplify scientific communication. For example, force is measured in newtons (N), where 1 N = 1 kg·m·s⁻². Energy is measured in joules (J), where 1 J = 1 kg·m²·s⁻². Pressure is measured in pascals (Pa), where 1 Pa = 1 kg·m⁻¹·s⁻². The derived unit for frequency is the hertz (Hz), equal to one reciprocal second. Derived units can be written using named units or expanded into base units. Both forms are equivalent, but the expanded form reveals the dimensional structure. A unit raised to a power indicates that the corresponding physical dimension is repeated. For example, square metre is m² and cubic metre is m³. Products of units are commonly separated by a centred dot or a space, such as N·m. Division can be expressed using a solidus, negative powers, or parentheses to avoid ambiguity. Parentheses are especially important when several units occur in a denominator. A joule and a newton-metre have equivalent dimensions, but their names emphasize different physical quantities and contexts. Similarly, hertz and becquerel both have the dimension s⁻¹ but refer to different quantities: periodic frequency and activity of a radionuclide. Electrical derived units are constructed from base units and include coulomb, volt, ohm, siemens, farad, henry, and weber. The correct use of unit symbols preserves the distinction between multiplication, division, and exponentiation.
SI Derived Units and Their Symbolic Representations
Explains how SI derived units are constructed from combinations of the seven SI base units. It covers common named derived units, unit multiplication and division, powers of units, dimensional relationships, and the correct representation of derived physical quantities.
Derived unit = mᵃ·kgᵇ·sᶜ·Aᵈ·Kᵉ·molᶠ·cdᵍ
Explanation
Variables
| Symbol | Meaning | Unit |
|---|---|---|
m | Base unit of length | metre |
kg | Base unit of mass | kilogram |
s | Base unit of time | second |
A | Base unit of electric current | ampere |
K | Base unit of thermodynamic temperature | kelvin |
mol | Base unit of amount of substance | mole |
cd | Base unit of luminous intensity | candela |
a, b, c, d, e, f, g | Integer or rational exponents specifying powers of the corresponding base units | Dimensionless exponents |
Example or application
A worked example has not yet been added.
Definition
An SI derived unit is a unit obtained by multiplying powers of SI base units according to the defining relationship of a derived physical quantity.
Purpose
Provides a standardized method for constructing and expressing units for physical quantities that are defined through combinations of base quantities.
Importance
Derived units connect mathematical relationships with measurable physical quantities. Their consistent notation supports dimensional analysis, engineering calculations, experimental measurement, and the detection of incorrect equations or unit conversions.
Common Derived Units
| Quantity | Unit Name | Symbol | Base Unit Expression |
|---|---|---|---|
Area | square metre | m² | m² |
Volume | cubic metre | m³ | m³ |
Velocity | metre per second | m/s | m·s⁻¹ |
Acceleration | metre per second squared | m/s² | m·s⁻² |
Frequency | hertz | Hz | s⁻¹ |
Force | newton | N | kg·m·s⁻² |
Pressure | pascal | Pa | kg·m⁻¹·s⁻² |
Energy | joule | J | kg·m²·s⁻² |
Power | watt | W | kg·m²·s⁻³ |
Electric charge | coulomb | C | A·s |
Potential difference | volt | V | kg·m²·s⁻³·A⁻¹ |
Electrical resistance | ohm | Ω | kg·m²·s⁻³·A⁻² |
Electrical conductance | siemens | S | kg⁻¹·m⁻²·s³·A² |
Capacitance | farad | F | kg⁻¹·m⁻²·s⁴·A² |
Magnetic flux | weber | Wb | kg·m²·s⁻²·A⁻¹ |
Magnetic flux density | tesla | T | kg·s⁻²·A⁻¹ |
Inductance | henry | H | kg·m²·s⁻²·A⁻² |
Unit Representation Rules
Use a centred dot or a space to indicate multiplication between unit symbols.
Use negative powers or a solidus to represent division.
Use parentheses when a denominator contains multiple unit factors.
Do not use more than one solidus in a unit expression unless parentheses make the structure unambiguous.
Write powers as superscripts, such as m², m³, and s⁻¹.
Unit symbols are case-sensitive.
Do not insert numerical factors into a unit symbol.
A named derived unit can be expanded into base units when dimensional analysis requires it.
Equivalent Representations
| Quantity | Named Unit | Expanded Unit | Relationship |
|---|---|---|---|
Force | N | kg·m·s⁻² | 1 N = 1 kg·m·s⁻² |
Energy | J | N·m | 1 J = 1 N·m |
Pressure | Pa | N/m² | 1 Pa = 1 N/m² |
Power | W | J/s | 1 W = 1 J/s |
Dimensional Examples
| Quantity | Dimension | Unit |
|---|---|---|
Velocity | LT⁻¹ | m·s⁻¹ |
Acceleration | LT⁻² | m·s⁻² |
Force | MLT⁻² | kg·m·s⁻² |
Energy | ML²T⁻² | kg·m²·s⁻² |
Worked Examples
| Problem | Solution |
|---|---|
Express 1 newton in SI base units. | From F = ma, the unit is kg × m/s² = kg·m·s⁻². |
Express 1 pascal in terms of newtons and square metres. | Pressure is force divided by area, so 1 Pa = 1 N/m². |
Express 1 watt in base units. | Power is energy per time. Therefore, 1 W = 1 J/s = 1 kg·m²·s⁻³. |
Common Errors
Confusing m² with 2m.
Writing compound units without making multiplication and division clear.
Treating hertz and becquerel as interchangeable quantities merely because both have unit s⁻¹.
Confusing the unit newton-metre with the named unit joule without considering the quantity represented.
Using incorrect capitalization in unit symbols.
Forgetting to square or cube the unit when the physical quantity is area or volume.
Applications
Mechanical and structural engineering calculations.
Electrical and electronic circuit analysis.
Fluid mechanics and thermodynamics.
Dimensional analysis and equation verification.
Scientific data processing and unit conversion.
Reference
BIPM, The International System of Units (SI Brochure), 9th edition.
NIST Special Publication 811, Guide for the Use of the International System of Units (SI).
IUPAC, Quantities, Units and Symbols in Physical Chemistry (Green Book).
Related Topic
SCI-REF-006-101
SCI-REF-006-102
SCI-REF-006-104
SCI-REF-006-105
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.
Suggest a correction or source · More in Scientific Symbols & Notation