✦ScienexySCIENCE KNOWLEDGE LIBRARY
abbreviation · SCI-REF-007-569

Engineering Geology Abbreviations

Abbreviations for rock and soil engineering properties and ground investigation.

Explanation

Abbreviations

AbbreviationFull FormMeaningUsage ExampleContext

RMR

Rock Mass Rating

A geomechanical classification system that evaluates rock mass quality using parameters such as strength, discontinuity spacing and groundwater conditions.

The tunnel rock mass was assigned an RMR class.

Rock engineering and tunnel design.

Q-system

Rock Mass Quality System

A numerical rock mass classification method developed for assessing rock conditions, particularly in underground excavations.

The Q-system was applied to the tunnel investigation.

Underground excavation and rock support assessment.

SPT

Standard Penetration Test

An in-situ geotechnical test that records the resistance to driving a sampler into soil under a standardized procedure.

The SPT N-value was recorded at each borehole depth.

Soil investigation and foundation engineering.

CPT

Cone Penetration Test

An in-situ test in which an instrumented cone is pushed into the ground to measure penetration resistance and related soil properties.

CPT data were used to interpret soil layers.

Geotechnical site investigation.

Example or application

A worked example has not yet been added.

Importance

Engineering geology abbreviations identify widely used systems and tests for evaluating ground conditions and construction suitability.

Related Topic

  • Physical Geology

  • Structural Geology

  • Geotechnical Engineering

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Abbreviations & Acronyms