✦ScienexySCIENCE KNOWLEDGE LIBRARY
definition · SCI-REF-008-079

Reproducibility of Measurements

Reproducibility of measurements describes agreement between measurement results obtained under changed but specified conditions.

Explanation

Definition

Reproducibility of measurements is the precision achieved when the same measurand is measured using changed conditions, such as different operators, laboratories, instruments, or measurement times.

Explanation

It evaluates whether a measurement procedure gives comparable results beyond a single operator or laboratory. The changed conditions must be documented so that the comparison is meaningful.

Key Characteristics

  • May involve different laboratories or operators.

  • Uses a defined measurement procedure.

  • Evaluates variation caused by changed measurement conditions.

  • Requires suitable comparison of results and uncertainty.

Example

Two laboratories independently measure the density of the same reference material using their own calibrated instruments and compare the results.

Distinction

This measurement-science meaning is related to, but more specific than, reproducibility in computational research.

Example or application

A worked example has not yet been added.

Importance

It establishes whether measurement results can be compared and trusted across different laboratories and measurement environments.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Definitions & Glossary