Definition
The metric system is a decimal-based measurement system in which units are related through powers of ten. The modern SI system is the internationally standardized form of the metric system.
Core Principle
Metric units are connected through decimal scaling. Converting between units of the same quantity involves multiplying or dividing by the appropriate power of ten.
Decimal Relationships
| Prefix | Symbol | Factor | Value |
|---|---|---|---|
kilo | k | 10³ | 1000 |
hecto | h | 10² | 100 |
deca | da | 10¹ | 10 |
unit | 10⁰ | 1 | |
deci | d | 10⁻¹ | 0.1 |
centi | c | 10⁻² | 0.01 |
milli | m | 10⁻³ | 0.001 |
Important Metric Relationships
1 km = 1,000 m
1 m = 100 cm
1 m = 1,000 mm
1 cm = 10 mm
1 kg = 1,000 g
1 g = 1,000 mg
1 L = 1,000 mL
1 kL = 1,000 L
Conversion Rule
To convert a quantity from one metric unit to another, multiply the original numerical value by the ratio of the source-unit scale to the target-unit scale.
General Formula
Target numerical value = Original numerical value × (Source-unit size ÷ Target-unit size)
Worked Examples
| Problem | Calculation | Answer | Explanation |
|---|---|---|---|
Convert 4.2 kilometres into metres. | 4.2 × 10³ = 4,200 | 4,200 m | A kilometre is 1,000 times larger than a metre, so the numerical value increases by a factor of 1,000. |
Convert 650 milligrams into grams. | 650 × 10⁻³ = 0.65 | 0.65 g | A milligram is one-thousandth of a gram, so the numerical value decreases when expressed in grams. |
Convert 2.5 litres into millilitres. | 2.5 × 1,000 = 2,500 | 2,500 mL |
Powers Of Ten Method
Identify the original unit and its prefix.
Identify the target unit and its prefix.
Determine the power of ten represented by each prefix.
Calculate the difference between the two powers.
Multiply or divide by the resulting power of ten.
Write the answer using the target unit.
Area And Volume Warning
Decimal prefix relationships must be raised to the appropriate power for area and volume. For example, 1 m = 100 cm, but 1 m² = 10,000 cm² and 1 m³ = 1,000,000 cm³.
Common Mistakes
Moving the decimal point in the wrong direction.
Assuming every metric conversion uses a factor of 10.
Forgetting that area conversion factors are squared.
Forgetting that volume conversion factors are cubed.
Confusing the prefix symbol m for milli with the unit symbol m for metre.
Applications
Laboratory measurements.
Scientific calculations involving decimal quantities.
Converting lengths, masses and volumes.
Industrial measurement and manufacturing.
Preparing data for scientific analysis.
Knowledge Check
| Question | Answer |
|---|---|
How many milligrams are equal to one gram? | 1,000 mg. |
What power of ten does the prefix kilo represent? | 10³. |
How many square centimetres are in one square metre? | 10,000 cm². |