Definition
An exact conversion factor is based on a defined relationship with no uncertainty in that relationship. An approximate conversion factor is rounded or derived from a measured or convention-dependent value and therefore has limited precision.
Exact Conversion Factors
Definition
An exact conversion factor is a relationship whose numerical value is defined exactly.
Examples
| Relationship | Reason |
|---|---|
1 inch = 0.0254 metre | The international inch is defined as exactly 0.0254 metre. |
1 minute = 60 seconds | The minute is defined as exactly 60 seconds. |
1 hour = 3,600 seconds | The hour is defined as exactly 3,600 seconds. |
1 kilometre = 1,000 metres | The kilo prefix is defined as exactly 10³. |
1 international foot = 0.3048 metre | The international foot is defined as exactly 0.3048 metre. |
1 standard atmosphere = 101,325 pascals | The standard atmosphere is defined as exactly 101,325 pascals. |
Approximate Conversion Factors
Definition
An approximate conversion factor is a rounded representation or a value whose exact numerical relationship depends on measurement conditions or a specified convention.
Examples
| Relationship | Reason |
|---|---|
1 mile ≈ 1.609 km | The exact international mile is 1.609344 km, while 1.609 km is rounded. |
1 pound ≈ 0.454 kg | The exact international pound is 0.45359237 kg, while 0.454 kg is rounded. |
1 US liquid gallon ≈ 3.785 L | The value is a rounded representation of the exact defined volume. |
Key Differences
| Feature | Exact Factor | Approximate Factor |
|---|---|---|
Numerical definition | Defined exact value | Rounded or estimated value |
Uncertainty in factor | No uncertainty in the defined relationship | Limited precision or uncertainty may be present |
Use in calculations | Can be retained without adding uncertainty from the factor itself | Can limit the precision of the final result |
Reporting | May be used at the required computational precision | Should be reported with suitable precision and context |
Precision Vs Accuracy
Precision
Describes the fineness or reproducibility of a numerical measurement or reported value.
Accuracy
Describes how close a measured result is to the true or accepted reference value.
Important Note
An exact conversion factor does not make an uncertain original measurement exact.
Worked Examples
| Problem | Calculation | Answer | Explanation |
|---|---|---|---|
Convert 5 inches into metres using the exact factor. | 5 × 0.0254 = 0.127 | 0.127 m | The inch-to-metre relationship is exact. |
Convert 10 miles into kilometres using the exact factor. | 10 × 1.609344 = 16.09344 | 16.09344 km | Using the exact international mile relationship gives the unrounded converted value. The final reported precision should still reflect the original measurement. |
Convert 10 miles into kilometres using a rounded factor of 1.609. | 10 × 1.609 = 16.09 | Approximately 16.09 km | The result is approximate because the conversion factor has been rounded. |
Selection Guidelines
Use exact factors whenever an exact definition is available.
Use approximate factors when the source provides only an approximate relationship or when a lower precision is sufficient.
Identify regional definitions before using traditional units.
Avoid rounding conversion factors too early in multi-step calculations.
Consider the precision of the original measurement when reporting the final answer.
Common Mistakes
Treating rounded factors as exact definitions.
Reporting excessive decimal places from an imprecise original measurement.
Assuming an exact conversion factor eliminates measurement uncertainty.
Using an approximate value when a defined exact relationship is available.
Ignoring differences between regional unit definitions.
Applications
Scientific data analysis.
Engineering calculations requiring precision.
Laboratory measurement reporting.
Converting historical measurements.
Interpreting published conversion tables.
Knowledge Check
| Question | Answer |
|---|---|
Is 1 inch = 0.0254 metre an exact relationship? | Yes. The international inch is defined as exactly 0.0254 metre. |
Is 1 mile = 1.609 km exact? | No. It is a rounded approximation of 1.609344 km. |
Does an exact conversion factor make an uncertain measurement exact? | No. Uncertainty in the original measurement remains. |