Frequency Definition
Frequency is the number of complete cycles occurring per second. It is measured in hertz (Hz).
Period Definition
The period is the time required for one complete cycle of a periodic process. It is measured in seconds (s).
Fundamental Relationship
f = 1/T
Reciprocal Formula
T = 1/f
Formula Variables
F
Frequency in hertz (Hz)
T
Period in seconds (s)
Unit Relationship
1 Hz = 1 s⁻¹
Physical Meaning
A high frequency means that more cycles occur each second, so the period is shorter.
A low frequency means that fewer cycles occur each second, so the period is longer.
Frequency and period are inversely proportional for a periodic process.
Conversion Method
Identify whether frequency or period is given.
Convert the known quantity into compatible SI units if necessary.
Use f = 1/T to calculate frequency from period.
Use T = 1/f to calculate period from frequency.
Express the result in hertz or seconds as appropriate.
Worked Examples
| Problem | Given | Calculation | Answer |
|---|---|---|---|
Find the period of a periodic signal with a frequency of 50 Hz. | f = 50 Hz | T = 1/50 = 0.02 s | T = 0.02 s = 20 ms |
Find the frequency of a process with a period of 0.005 seconds. | T = 0.005 s | f = 1/0.005 = 200 | f = 200 Hz |
Find the period of a 2 kHz signal. | f = 2 kHz = 2000 Hz | T = 1/2000 = 0.0005 s | T = 0.0005 s = 0.5 ms |
Comparison Table
| Frequency | Period |
|---|---|
1 Hz | 1 s |
10 Hz | 0.1 s |
100 Hz | 0.01 s |
1000 Hz | 0.001 s |
1000000 Hz | 0.000001 s |
Important Distinctions
Frequency counts cycles per unit time; period measures the duration of one cycle.
The reciprocal relationship applies to periodic processes with a well-defined period.
Frequency must be expressed in hertz when using the period formula in seconds.
For a non-periodic signal, a single repeating-cycle period may not be defined.
A frequency of zero does not correspond to a finite repeating-cycle period.
Common Mistakes
Multiplying frequency by period instead of taking the reciprocal.
Using milliseconds directly without converting them to seconds when the answer requires hertz.
Confusing frequency with angular frequency, which is measured in radians per second.
Assuming a higher frequency means a longer period.
Applications
Oscillations and vibrations.
Sound and musical signal analysis.
Alternating-current electrical systems.
Radio and communication signals.
Wave and periodic-motion calculations.
Practice
Find the period of a 25 Hz signal.
Find the frequency of a periodic process with a period of 0.002 seconds.
Convert a frequency of 5 kHz into its period in milliseconds.
Explain why increasing frequency decreases the period.
Practice Answers
0.04 s
500 Hz
0.2 ms
Because frequency and period are reciprocals: as frequency increases, the time required for one cycle decreases.