An absolute temperature describes the thermal state of a system, whereas a temperature difference describes how much the temperature changes between two states. These quantities must not be treated identically in conversion formulas. Absolute temperature conversions between scales may require both a multiplication factor and an offset. Temperature differences require only the interval-size conversion because the zero-point offset cancels when subtracting two temperatures. Celsius and Kelvin intervals have equal sizes, so a change of 1 °C equals a change of 1 K. A Fahrenheit interval is smaller: a change of 1 °F equals 5/9 K or 5/9 °C. Conversely, a change of 1 K or 1 °C equals 1.8 °F or 1.8 °R.
Temperature Differences and Temperature Intervals
Distinguish an absolute temperature reading from a temperature difference or interval.
ΔK = Δ°C; Δ°F = (9/5) × Δ°C; Δ°C = (5/9) × Δ°F; Δ°R = Δ°F
Explanation
Variables
ΔK
Change in temperature measured in kelvin.
Δ°C
Change in temperature measured in degrees Celsius.
Δ°F
Change in temperature measured in degrees Fahrenheit.
Δ°R
Change in temperature measured in degrees Rankine.
Δ
Symbol indicating a difference or change.
Example or application
Problem
A temperature increases from 20 °C to 35 °C. Find the temperature increase in kelvin and Fahrenheit degrees.
Solution
Δ°C = 35 − 20 = 15 °C. ΔK = 15 K. Δ°F = 15 × 9/5 = 27 °F.
Answer
15 K or 27 °F
Definition
A temperature difference or interval is the numerical change between two temperature readings, rather than an absolute temperature value.
Purpose
To explain why temperature differences use different conversion rules from absolute temperature readings.
Importance
This distinction prevents errors in heat-transfer calculations, thermodynamic analysis, laboratory reports, and engineering measurements.
Common Mistakes
Adding 273.15 when converting a Celsius temperature difference into a Kelvin difference.
Adding 32 when converting a Celsius temperature interval into a Fahrenheit interval.
Using absolute-temperature formulas for temperature changes.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM - The International System of Units (SI Brochure)
- NIST - Guide to the SI
Suggest a correction or source · More in Conversions & Equivalences