✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-166

Introduction to Speed, Velocity and Acceleration Units

Understand speed, velocity, acceleration, and the units used to measure motion.

Average speed = Total distance / Total time; Average velocity = Displacement / Time interval; Average acceleration = Change in velocity / Time interval

Explanation

Speed, velocity, and acceleration describe different aspects of motion. Speed measures how quickly an object covers distance and is a scalar quantity, meaning it has magnitude but no direction. Velocity measures the rate of change of displacement and is a vector quantity with both magnitude and direction. Acceleration measures the rate of change of velocity over time and is also a vector quantity. The SI unit of speed and velocity is metres per second (m·s⁻¹), while acceleration is measured in metres per second squared (m·s⁻²). Other commonly used speed units include kilometres per hour (km·h⁻¹), miles per hour (mph), knots (kn), feet per second (ft·s⁻¹), and centimetres per second (cm·s⁻¹). Acceleration may also be expressed in standard gravity (g) or gal (Gal). Angular speed describes rotational motion and is commonly measured in revolutions per minute (rpm), revolutions per second, or radians per second (rad·s⁻¹). Conversions must account for both the distance and time units. For example, converting km/h to m/s requires converting kilometres to metres and hours to seconds.

Variables

Distance

Total path length travelled.

Displacement

Vector change in position.

Time

Time interval during motion.

Velocity

Rate of change of displacement.

Acceleration

Rate of change of velocity.

Example or application

Problem

A vehicle travels 120 metres in 6 seconds. Calculate its average speed.

Solution

Average speed = 120 / 6 = 20 m·s⁻¹.

Answer

20 m·s⁻¹

Definition

Speed is the rate of distance travelled, velocity is the rate of displacement, and acceleration is the rate of change of velocity.

Common Units

QuantityUnitSymbolSystem

Speed and velocity

Metres per second

m·s⁻¹

SI

Speed

Kilometres per hour

km·h⁻¹

Speed

Miles per hour

mph

Speed

Knot

kn

Acceleration

Metres per second squared

m·s⁻²

SI

Acceleration

Standard gravity

g

Angular speed

Radians per second

rad·s⁻¹

Purpose

To establish the physical meanings and measurement units needed for speed, velocity, acceleration, and rotational motion conversions.

Importance

These quantities are fundamental to mechanics, transport, aviation, sports science, robotics, engineering, and physics experiments.

Common Mistakes

  • Treating speed and velocity as identical quantities even though velocity includes direction.

  • Confusing acceleration with speed.

  • Using m·s⁻¹ for acceleration instead of m·s⁻².

  • Converting only the distance unit or only the time unit.

  • Confusing angular speed with linear speed.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • BIPM - The International System of Units (SI Brochure)
  • OpenStax - University Physics, Volume 1

Suggest a correction or source · More in Conversions & Equivalences