✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-181

Introduction to Acceleration Units

Understand acceleration as the rate of velocity change and learn its common measurement units.

a = Δv / Δt

Explanation

Acceleration describes how quickly velocity changes with time. Since velocity includes both magnitude and direction, acceleration can occur when an object speeds up, slows down, or changes direction. The SI unit is metres per second squared (m·s⁻²). This unit can be understood as the change in velocity, measured in metres per second, occurring during each second. Other acceleration units include centimetres per second squared (cm·s⁻²), feet per second squared (ft·s⁻²), gal (Gal), and standard gravity (g). One gal equals 1 cm·s⁻², while standard gravity is defined as exactly 9.80665 m·s⁻². Standard gravity is a conventional reference value and is not identical to the actual gravitational acceleration at every location on Earth. Acceleration is a vector, so its direction must be considered when describing motion.

Variables

A

Average acceleration.

Δv

Change in velocity.

Δt

Time interval over which velocity changes.

Example or application

Problem

An object changes velocity from 5 m·s⁻¹ to 17 m·s⁻¹ in 4 seconds. Find its average acceleration.

Solution

a = (17 − 5) / 4 = 12 / 4 = 3 m·s⁻².

Answer

3 m·s⁻²

Definition

Acceleration is the rate of change of velocity with respect to time.

Common Units

UnitSymbolConversion

Metres per second squared

m·s⁻²

SI unit

Centimetres per second squared

cm·s⁻²

1 cm·s⁻² = 0.01 m·s⁻²

Gal

Gal

1 Gal = 0.01 m·s⁻²

Standard gravity

g

1 g = 9.80665 m·s⁻²

Feet per second squared

ft·s⁻²

1 ft·s⁻² = 0.3048 m·s⁻²

Purpose

To establish the meaning and units of acceleration before performing acceleration conversions.

Importance

Acceleration is essential in mechanics, vehicle dynamics, engineering, aerospace science, and the study of forces and motion.

Common Mistakes

  • Using distance instead of change in velocity when calculating acceleration.

  • Writing acceleration in m·s⁻¹ instead of m·s⁻².

  • Assuming acceleration always means increasing speed.

  • Treating standard gravity as the exact local gravitational acceleration everywhere.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • BIPM - The International System of Units (SI Brochure)
  • OpenStax - University Physics, Volume 1

Suggest a correction or source · More in Conversions & Equivalences