To convert rotational speed from revolutions per minute into radians per second, multiply the rpm value by 2π/60. Each complete revolution corresponds to 2π radians, and each minute contains 60 seconds. The conversion can also be written as rpm × π/30. The result is an angular speed, not a linear speed. To calculate tangential speed at a particular radius, multiply angular speed by the radius.
RPM to Radians per Second Conversion
Convert revolutions per minute into radians per second by multiplying by 2π/60.
ω = rpm × 2π/60 = rpm × π/30
Explanation
Variables
Ω
Angular speed in radians per second.
Rpm
Rotational speed in revolutions per minute.
2π
Angular displacement in radians for one complete revolution.
60
Seconds in one minute.
Example or application
Problem
Convert 120 rpm into radians per second.
Solution
ω = 120 × 2π/60 = 4π rad·s⁻¹.
Answer
Approximately 12.5664 rad·s⁻¹
Definition
RPM-to-radians-per-second conversion expresses rotational speed as angular displacement per second.
Conversion Steps
Identify the rotational speed in rpm.
Multiply by 2π to convert revolutions into radians.
Divide by 60 to convert minutes into seconds.
Express the result in rad·s⁻¹.
Purpose
To convert rotational-speed measurements into angular speed in SI-compatible units.
Importance
This conversion is used in motor engineering, rotational dynamics, machinery design, and circular-motion calculations.
Common Mistakes
Dividing by 60 but forgetting the 2π radians per revolution.
Using 360 degrees as though the formula required degrees rather than radians.
Confusing angular speed with frequency in hertz.
Reporting rad·s⁻¹ as linear speed.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM - The International System of Units (SI Brochure)
- OpenStax - University Physics, Volume 1
Suggest a correction or source · More in Conversions & Equivalences