✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-201

Introduction to Pressure and Stress Units

Understand pressure and stress as force distributed over an area and learn their common units.

p = F/A; σ = F/A; τ = Fₜ/A

Explanation

Pressure and stress are related physical quantities defined as force per unit area, but they describe different physical situations. Pressure is commonly used for fluids and gases and acts normal to a surface. Stress describes internal forces distributed across a material's cross-sectional area and may be normal or shear stress. Their SI unit is the pascal (Pa), equal to one newton per square metre. Common larger units include kilopascal (kPa), megapascal (MPa), and bar. Other pressure units include standard atmosphere (atm), millimetre of mercury (mmHg), torr, and pounds per square inch (psi). One bar equals exactly 100,000 Pa, while one standard atmosphere equals exactly 101,325 Pa. The torr is defined as one seven-hundred-sixtieth of a standard atmosphere. Pressure and stress have the same dimensional unit, but their physical meanings and applications differ. Gauge pressure is measured relative to ambient pressure, while absolute pressure is measured relative to a perfect vacuum.

Variables

P

Pressure.

Σ

Normal stress.

Τ

Shear stress.

F

Applied normal force.

Fₜ

Tangential force.

A

Area over which force acts.

Example or application

Problem

A perpendicular force of 200 N acts uniformly over an area of 0.5 m². Calculate the pressure.

Solution

p = F/A = 200/0.5 = 400 Pa.

Answer

400 Pa

Definition

Pressure is the normal force acting per unit area, while stress is the internal force per unit area within a material.

Common Units

UnitSymbolRelationshipSystem

Pascal

Pa

1 Pa = 1 N·m⁻²

SI

Kilopascal

kPa

1 kPa = 1000 Pa

Megapascal

MPa

1 MPa = 1,000,000 Pa

Bar

bar

1 bar = 100,000 Pa

Standard atmosphere

atm

1 atm = 101,325 Pa

Millimetre of mercury

mmHg

Approximately 133.322387 Pa under the conventional definition

Torr

Torr

1 Torr = 101,325/760 Pa

Pound per square inch

psi

1 psi ≈ 6894.757293 Pa

Pressure Types

TypeDescription

Absolute pressure

Pressure measured relative to a perfect vacuum.

Gauge pressure

Pressure measured relative to the surrounding atmospheric pressure.

Differential pressure

The difference between two pressure measurements.

Purpose

To introduce pressure and stress measurements and establish the relationships between common units.

Importance

Pressure and stress are essential in fluid mechanics, thermodynamics, structural engineering, material science, hydraulics, and atmospheric science.

Common Mistakes

  • Confusing pressure with force.

  • Using an area unit without converting it to square metres when SI units are required.

  • Treating gauge pressure and absolute pressure as identical.

  • Assuming pressure and stress have identical physical meanings merely because they share a unit.

  • Confusing bar with pascal or atmosphere.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • BIPM - The International System of Units (SI Brochure)
  • NIST - Guide to the SI
  • OpenStax - University Physics, Volume 1

Suggest a correction or source · More in Conversions & Equivalences