✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-218

PSI to Pascal Conversion

Convert pounds per square inch into pascals using approximately 6894.757293.

Pa = psi × 6894.757293168

Explanation

Pounds per square inch (psi) is a pressure unit commonly used in the United States and in some industrial and engineering applications. One psi means one pound-force acting on an area of one square inch. Using the international pound-force and square-inch definitions, one psi equals approximately 6894.757293168 Pa. To convert psi into pascals, multiply the numerical value by this factor. PSI may also be written as lbf·in⁻².

Variables

Pa

Converted pressure in pascals.

Psi

Original pressure in pounds per square inch.

6894.757293168

Conversion factor from psi to Pa.

Example or application

Problem

Convert 30 psi into pascals.

Solution

30 × 6894.757293168 ≈ 206,842.7188 Pa.

Answer

Approximately 206,843 Pa

Definition

PSI-to-pascal conversion expresses pressure measured in pounds per square inch as an equivalent value in pascals.

Conversion Steps

  • Identify the pressure in psi.

  • Multiply by approximately 6894.757293168.

  • Express the result in Pa.

  • Use adequate precision for the engineering application.

Purpose

To convert US customary pressure measurements into SI units.

Importance

This conversion is useful in tyre-pressure specifications, hydraulic systems, industrial equipment, and mechanical engineering.

Common Mistakes

  • Confusing psi with pound-force.

  • Using the pound-mass conversion factor instead of the pound-force conversion factor.

  • Forgetting that pressure is force divided by area.

  • Confusing psi with psf, which means pounds per square foot.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • NIST - Guide to the SI
  • NIST - Handbook 44

Suggest a correction or source · More in Conversions & Equivalences