A gram per cubic centimetre is a commonly used density unit for solids and liquids. A kilogram per cubic metre is the corresponding SI unit. Since 1 g = 0.001 kg and 1 cm³ = 0.000001 m³, one gram per cubic centimetre is equivalent to 1000 kilograms per cubic metre. Therefore, multiply a density value in g/cm³ by 1000 to obtain kg/m³.
Grams per Cubic Centimetre to Kilograms per Cubic Metre Conversion
Convert density measurements from g/cm³ into the SI unit kg/m³.
ρ(kg/m³) = ρ(g/cm³) × 1000
Explanation
Variables
Ρ(g/cm³)
Density expressed in grams per cubic centimetre
Ρ(kg/m³)
Equivalent density expressed in kilograms per cubic metre
Example or application
Convert 2.7 g/cm³ into kg/m³. Calculation: 2.7 × 1000 = 2700 kg/m³.
Definition
This conversion changes a density value expressed in grams per cubic centimetre into kilograms per cubic metre.
Conversion Factor
1 g/cm³ = 1000 kg/m³
Purpose
To express laboratory and material-density measurements in the SI unit.
Importance
This conversion is useful when density measurements from chemistry, materials science, and engineering must be used in SI-based calculations.
Procedure
Identify the density value in g/cm³.
Multiply the value by 1000.
Express the result in kg/m³.
Check that the original unit has been replaced rather than retained.
Common Mistakes
Multiplying by 100 instead of 1000.
Forgetting that the conversion applies to the complete density unit.
Writing the result in g/m³ instead of kg/m³.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM, The International System of Units (SI Brochure)
- NIST, Guide for the Use of the International System of Units (SI)
Suggest a correction or source · More in Conversions & Equivalences