✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-260

Pounds per Cubic Foot to Kilograms per Cubic Metre Conversion

Convert density measurements from lb/ft³ into the SI unit kg/m³.

ρ(kg/m³) = ρ(lb/ft³) × 16.01846337

Explanation

Pounds per cubic foot is a customary density unit used in some engineering, construction, and materials applications. To convert it into kilograms per cubic metre, use the international avoirdupois pound and the international foot. One pound equals exactly 0.45359237 kg, and one foot equals exactly 0.3048 m. After cubing the length conversion, the resulting density conversion factor is approximately 16.01846337. Multiply the value in lb/ft³ by this factor to obtain kg/m³.

Variables

Ρ(lb/ft³)

Density in pounds per cubic foot

Ρ(kg/m³)

Density in kilograms per cubic metre

Example or application

Convert 50 lb/ft³ into kg/m³. Calculation: 50 × 16.01846337 = 800.9231685 kg/m³, approximately 801 kg/m³.

Definition

This conversion changes a density measurement from pounds per cubic foot into kilograms per cubic metre.

Conversion Factor

1 lb/ft³ ≈ 16.01846337 kg/m³

Purpose

To convert customary engineering density measurements into SI units.

Importance

It is useful in construction, building-material specifications, insulation analysis, and engineering calculations involving material density.

Procedure

  • Identify the density in lb/ft³.

  • Multiply the value by approximately 16.01846337.

  • Express the result in kg/m³.

  • Retain appropriate significant figures based on the original measurement.

Common Mistakes

  • Using the pound-to-kilogram factor without cubing the foot-to-metre conversion.

  • Confusing lb/ft³ with lb/gal.

  • Using a force unit instead of a mass unit.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • NIST, Guide for the Use of the International System of Units (SI)
  • NIST, Handbook 44, Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices

Suggest a correction or source · More in Conversions & Equivalences