✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-264

Introduction to Specific Gravity and Relative Density

Learn how specific gravity compares the density of a substance with the density of a reference material.

SG = ρₛ/ρᵣ

Explanation

Specific gravity, commonly used as a synonym for relative density, is the ratio of the density of a substance to the density of a specified reference material under stated conditions. It is a dimensionless quantity because the numerator and denominator have the same units. For liquids and solids, water is commonly used as the reference material. For gases, air or another specified gas may be used. The reference temperature and, where relevant, pressure must be stated because density changes with these conditions. A specific gravity greater than 1 means the sample is denser than the reference material under the stated conditions, while a value below 1 means it is less dense.

Variables

SG

Specific gravity or relative density

Ρₛ

Density of the sample

Ρᵣ

Density of the reference material under the specified conditions

Example or application

If a liquid has a density of 800 kg/m³ and the reference water density is taken as 1000 kg/m³ under the specified conditions, its specific gravity is 800 ÷ 1000 = 0.80.

Definition

Specific gravity is the ratio of the density of a substance to the density of a specified reference material at stated conditions.

Purpose

To compare the density of a substance with a known reference without requiring the ratio to have a physical unit.

Importance

Specific gravity is widely used in chemistry, petroleum engineering, mineral identification, food science, and fluid mechanics. It provides a convenient way to compare materials and estimate density when the reference density is known.

Key Characteristics

  • It is dimensionless.

  • Its value depends on the selected reference material.

  • Temperature and pressure conditions can affect the result.

  • For many liquid and solid applications, water is the reference material.

  • For gases, the reference may be air or another specified gas.

Interpretation

  • SG = 1: The sample and reference have equal densities under the stated conditions.

  • SG > 1: The sample is denser than the reference.

  • SG < 1: The sample is less dense than the reference.

Common Mistakes

  • Treating specific gravity as a quantity with units.

  • Assuming the reference is always water.

  • Ignoring the reference temperature.

  • Comparing values based on different reference materials.

Applications

  • Comparing the density of liquids and solids.

  • Checking the quality or concentration of certain solutions.

  • Identifying minerals and materials.

  • Estimating liquid density from a known reference density.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • IUPAC, Compendium of Chemical Terminology (Gold Book)
  • NIST, Guide for the Use of the International System of Units (SI)

Suggest a correction or source · More in Conversions & Equivalences