✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-265

Specific Gravity and Density: Mathematical Relationship

Understand the mathematical relationship between specific gravity, sample density, and reference density.

SG = ρₛ/ρᵣ; ρₛ = SG × ρᵣ; ρᵣ = ρₛ/SG

Explanation

Specific gravity is calculated by dividing the density of a sample by the density of a specified reference material. The relationship can be rearranged to calculate any one of the three quantities when the other two are known. If specific gravity and reference density are known, sample density is obtained by multiplication. If sample density and specific gravity are known, reference density is obtained by division. All density values must refer to compatible conditions and use consistent units.

Variables

SG

Specific gravity

Ρₛ

Sample density

Ρᵣ

Reference density

Example or application

A liquid has a density of 900 kg/m³. The reference water density under the chosen conditions is 1000 kg/m³. Specific gravity = 900 ÷ 1000 = 0.90. Conversely, a substance with SG = 0.90 relative to this reference has a density of 0.90 × 1000 = 900 kg/m³.

Definition

The mathematical relationship between specific gravity and density is a dimensionless ratio of sample density to reference density.

Purpose

To calculate specific gravity or determine an unknown density using a known reference density.

Importance

This relationship connects dimensionless density comparisons with measurable physical quantities and supports calculations in chemistry, engineering, and material analysis.

Calculation Rules

  • To calculate specific gravity, divide sample density by reference density.

  • To calculate sample density, multiply specific gravity by reference density.

  • To calculate reference density, divide sample density by specific gravity.

  • Use the same density units in the numerator and denominator.

  • Use reference density values corresponding to the stated temperature and pressure.

Common Mistakes

  • Dividing the reference density by the sample density.

  • Using incompatible density units.

  • Treating specific gravity as a density with units.

  • Using a reference density from an unrelated temperature.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • IUPAC, Compendium of Chemical Terminology (Gold Book)
  • NIST, Guide for the Use of the International System of Units (SI)

Suggest a correction or source · More in Conversions & Equivalences