To calculate specific gravity from density, divide the sample density by the density of the specified reference material. Both density values must use compatible units and correspond to the same relevant conditions. The units cancel during division, leaving a dimensionless result. For liquids and solids, water is a common reference, but its density varies with temperature.
Converting Density into Specific Gravity
Calculate specific gravity by comparing a measured density with a reference density.
SG = ρₛ/ρᵣ
Explanation
Variables
SG
Specific gravity
Ρₛ
Measured sample density
Ρᵣ
Reference density
Example or application
A liquid has a density of 750 kg/m³. If the reference water density is taken as 1000 kg/m³ for this illustrative calculation, SG = 750 ÷ 1000 = 0.75.
Definition
Converting density into specific gravity means dividing the sample density by the density of a specified reference material.
Conversion Factor
Specific gravity is calculated as a ratio; the result has no physical unit.
Purpose
To express an absolute density measurement as a relative comparison with a reference material.
Importance
It supports material comparison, liquid identification, laboratory testing, and quality-control procedures.
Procedure
Measure or obtain the sample density.
Identify the reference material and its density.
Ensure both densities use the same units.
Divide sample density by reference density.
Report the result without a unit and state the reference conditions.
Common Mistakes
Dividing the reference density by the sample density.
Leaving a density unit attached to the final ratio.
Comparing densities measured under incompatible conditions.
Assuming water always has exactly 1000 kg/m³ density.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC, Compendium of Chemical Terminology (Gold Book)
- NIST, Thermophysical Properties of Fluid Systems
Suggest a correction or source · More in Conversions & Equivalences