✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-269

Temperature Dependence of Density and Specific Gravity

Understand why density and specific gravity can change with temperature and why measurement conditions matter.

ρ = m/V; SG = ρₛ(Tₛ)/ρᵣ(Tᵣ)

Explanation

Density is mass divided by volume. When temperature changes, a material may expand or contract, changing its volume even when its mass remains constant. For most liquids and solids, heating causes expansion and a decrease in density, while cooling causes contraction and an increase in density. Water is an important exception: at ordinary atmospheric pressure, pure water reaches its maximum density near 4 °C. Gas density is particularly sensitive to both temperature and pressure. Because specific gravity is a ratio of densities, it can also change when the sample or reference material changes temperature. A meaningful specific-gravity value should therefore identify the sample temperature and reference temperature, commonly written in forms such as SG at 20 °C relative to water at 4 °C. These conventions must be followed carefully when comparing measurements.

Variables

Ρ

Density

M

Mass

V

Volume

SG

Specific gravity

Tₛ

Sample temperature

Tᵣ

Reference-material temperature

Ρₛ(Tₛ)

Sample density at its stated temperature

Ρᵣ(Tᵣ)

Reference density at its stated temperature

Example or application

A liquid sample has a measured density of 850 kg/m³ at 20 °C. Its density at another temperature cannot be assumed to remain 850 kg/m³. A suitable temperature-dependent density table or validated correction method is needed before using the value under different conditions.

Definition

Temperature dependence of density describes the change in mass per unit volume caused by temperature-related changes in a material's volume or state.

Purpose

To explain why density and specific-gravity measurements must be interpreted using their temperature and pressure conditions.

Importance

Temperature corrections are important in fuel measurement, chemical processing, laboratory analysis, fluid storage, and industrial quality control.

Key Principles

  • For most liquids, increasing temperature reduces density because the liquid expands.

  • For most solids, thermal expansion also reduces density when mass remains constant.

  • Water has unusual expansion behavior near its freezing point and reaches maximum density near 4 °C at ordinary atmospheric pressure.

  • Gas density depends strongly on temperature and pressure.

  • Specific gravity depends on the temperatures of both the sample and reference material.

Measurement Considerations

  • Record the sample temperature during measurement.

  • Identify the reference temperature used for specific gravity.

  • Use appropriate density tables or validated correction methods when conditions differ.

  • For gases, record pressure as well as temperature.

  • Do not apply a generic temperature correction to every substance; expansion behavior is material-dependent.

Common Mistakes

  • Assuming density is independent of temperature.

  • Using the density of water at 4 °C for every temperature without stating the convention.

  • Ignoring pressure when working with gases.

  • Applying the same thermal expansion correction to unrelated materials.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • NIST, Thermophysical Properties of Fluid Systems
  • IAPWS, Revised Release on the IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance

Suggest a correction or source · More in Conversions & Equivalences