The volt is the SI derived unit of electric potential difference. A millivolt is one-thousandth of a volt. Since milli means 10⁻³, one volt equals 1000 millivolts. Multiply the voltage value in volts by 1000 to convert it into millivolts.
Volt to Millivolt Conversion
Convert electrical potential difference from volts into millivolts.
V(mV) = V(V) × 1000
Explanation
Variables
V(V)
Potential difference in volts
V(m V)
Potential difference in millivolts
Example or application
Convert 0.025 V into millivolts. Calculation: 0.025 × 1000 = 25 mV.
Definition
This conversion expresses potential difference measured in volts as millivolts.
Conversion Factor
1 V = 1000 mV
Purpose
To represent small voltage measurements using millivolts.
Importance
Millivolts are commonly used in sensor outputs, audio electronics, signal measurements, and precision instruments.
Procedure
Identify the voltage in volts.
Multiply the value by 1000.
Write the result in millivolts.
Check that the numerical value increases.
Common Mistakes
Dividing instead of multiplying.
Writing MV instead of mV.
Confusing millivolts with microvolts.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM, The International System of Units (SI Brochure)
- NIST, Guide for the Use of the International System of Units (SI)
Suggest a correction or source · More in Conversions & Equivalences