✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-287

Megohm to Ohm Conversion

Convert high electrical resistance values from megohms into ohms.

R(Ω) = R(MΩ) × 1,000,000

Explanation

One megohm equals 1,000,000 ohms. To convert megohms into ohms, multiply the numerical value by one million. This conversion is used when high-resistance measurements need to be entered into equations or recorded in ohms.

Variables

R(MΩ)

Original resistance in megohms

R(Ω)

Converted resistance in ohms

Example or application

Convert 0.75 MΩ into ohms. Calculation: 0.75 × 1,000,000 = 750,000 Ω.

Definition

This conversion expresses resistance measured in megohms as ohms.

Conversion Factor

1 MΩ = 1,000,000 Ω

Purpose

To convert large resistance measurements into the SI-derived unit ohm.

Importance

It is useful in insulation-resistance calculations, high-resistance circuit analysis, and electrical testing.

Procedure

  • Identify the resistance in MΩ.

  • Multiply the value by 1,000,000.

  • Write the result in Ω.

  • Verify the result by converting it back to megohms.

Common Mistakes

  • Dividing instead of multiplying.

  • Confusing MΩ with kΩ.

  • Using lowercase m for the mega prefix.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • BIPM, The International System of Units (SI Brochure)
  • IEC 60027, Letter Symbols to Be Used in Electrical Technology

Suggest a correction or source · More in Conversions & Equivalences