✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-306

Introduction to Heat and Thermodynamic Quantities

An introduction to the physical quantities used to describe heat, temperature, energy transfer and thermodynamic properties, including their SI units and relationships.

Q = mcΔT; C = Q/ΔT; q = Q/m

Explanation

Thermodynamics studies energy, heat, work, temperature and the properties of systems. Several quantities are used to describe thermal behaviour. Heat is energy transferred because of a temperature difference and is measured in joules (J). Temperature describes the thermal state of a system and is measured in kelvin (K). Heat capacity measures the energy required to change an object's temperature by one kelvin, while specific heat capacity describes this requirement per unit mass. Other important quantities include thermal conductivity, entropy, enthalpy, latent heat and thermal diffusivity. Some thermodynamic quantities are extensive, meaning they depend on the amount of material, while others are intensive and do not depend on system size. Correct unit conversion is essential when these quantities appear together in equations.

Variables

Q

Heat transferred, measured in joules (J)

M

Mass, measured in kilograms (kg)

C

Specific heat capacity, measured in J/(kg·K)

ΔT

Temperature change, measured in kelvin (K) or degrees Celsius (°C) for a temperature difference

C

Heat capacity, measured in J/K

Q

Specific heat energy, measured in J/kg

Example or application

A material absorbs 2,000 J of heat. The transferred energy is 2 kJ because 1 kJ = 1,000 J. If the material has a mass of 2 kg and its temperature increases by 5 K, its specific heat capacity can be calculated using c = Q/(mΔT) = 200 J/(kg·K).

Definition

Heat and thermodynamic quantities are measurable physical properties and energy-transfer quantities used to describe the thermal state, energy changes and behaviour of physical systems.

Purpose

To introduce the main thermal and thermodynamic quantities and establish the unit relationships needed for accurate calculations.

Importance

Understanding these quantities prevents confusion between heat and temperature, total and mass-specific properties, and energy units used in thermal calculations.

Quantity Classification

Energy And Transfer

  • Heat: joule (J)

  • Heat-transfer rate: watt (W)

  • Heat flux: W/m²

Thermal Properties

  • Specific heat capacity: J/(kg·K)

  • Thermal conductivity: W/(m·K)

  • Thermal diffusivity: m²/s

Thermodynamic Properties

  • Entropy: J/K

  • Specific entropy: J/(kg·K)

  • Enthalpy: J/mol or J/kg

Common Mistakes

  • Treating heat and temperature as interchangeable quantities.

  • Using J/K when the required unit is J/(kg·K).

  • Confusing heat energy (J) with heat-transfer rate (W).

  • Using an absolute temperature value where a temperature difference is required.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • BIPM, The International System of Units (SI Brochure)
  • NIST, Guide for the Use of the International System of Units (SP 811)
  • IUPAC, Compendium of Chemical Terminology

Suggest a correction or source · More in Conversions & Equivalences