✦ScienexySCIENCE KNOWLEDGE LIBRARY
concept · SCI-REF-009-310

Specific Heat Capacity: Unit Relationships

Introduces specific heat capacity and explains the units used to express the energy needed to change a material's temperature.

Q = mcΔT; c = Q/(mΔT)

Explanation

Specific heat capacity is the amount of energy required to raise the temperature of one kilogram of a substance by one kelvin, under specified conditions. Its SI unit is joule per kilogram-kelvin, written J/(kg·K). The same numerical temperature interval can be expressed in degrees Celsius or kelvin because a change of 1 °C equals a change of 1 K. Consequently, J/(kg·°C) and J/(kg·K) have the same numerical value when describing temperature differences. Specific heat capacity may depend on temperature, pressure and the physical state of the material. For gases, values at constant pressure and constant volume are different.

Variables

Q

Heat transferred, in joules (J)

M

Mass, in kilograms (kg)

C

Specific heat capacity, in J/(kg·K)

ΔT

Temperature change, in kelvin (K) or degrees Celsius (°C)

Example or application

A material has a specific heat capacity of 900 J/(kg·K). This is numerically equivalent to 900 J/(kg·°C), because a temperature difference of 1 K equals a difference of 1 °C.

Definition

Specific heat capacity is the heat energy required per unit mass to produce a unit increase in temperature under specified conditions.

Purpose

To explain the meaning and dimensional structure of specific heat capacity units.

Importance

Specific heat capacity is essential for calculating heating and cooling requirements, comparing materials and analysing thermal storage.

Unit Relationships

  • J/(kg·K) = J/(kg·°C) in numerical value for temperature differences.

  • 1 kJ/(kg·K) = 1,000 J/(kg·K).

  • 1 J/(g·K) = 1,000 J/(kg·K).

  • The mass unit and energy unit must be made consistent before substitution.

Common Mistakes

  • Using degrees Celsius and kelvin as though their absolute temperature values were interchangeable.

  • Forgetting that the unit contains mass as well as temperature.

  • Assuming specific heat capacity is constant under all physical conditions.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • IUPAC, Compendium of Chemical Terminology
  • NIST, Guide for the Use of the International System of Units (SP 811)
  • International Association for the Properties of Water and Steam (IAPWS), thermodynamic property formulations

Suggest a correction or source · More in Conversions & Equivalences