Thermal conductivity describes how readily a material conducts heat. Its SI unit is watt per metre-kelvin, written W/(m·K). A higher thermal conductivity generally indicates that a material can transfer heat more readily under the same temperature gradient and geometry. In Fourier's law of heat conduction, heat-transfer rate is proportional to thermal conductivity, area and temperature gradient. Thermal conductivity is a material property that can depend on temperature, composition, density, moisture and direction in anisotropic materials.
Thermal Conductivity: Watt per Metre-Kelvin Unit
Introduces thermal conductivity and explains the meaning of its SI unit, watt per metre-kelvin.
q̇ = −kA(dT/dx)
Explanation
Variables
Q̇
Rate of heat transfer, in watts (W)
K
Thermal conductivity, in W/(m·K)
A
Cross-sectional area perpendicular to heat flow, in m²
D T/dx
Temperature gradient, in K/m
X
Distance along the direction of heat transfer
Example or application
If a material has thermal conductivity k = 0.8 W/(m·K), this value describes its heat-conduction property. It does not mean that the material transfers exactly 0.8 W in every situation; actual heat flow also depends on area, thickness and temperature difference.
Definition
Thermal conductivity is a material property that quantifies its ability to conduct heat in response to a temperature gradient.
Purpose
To establish the meaning of thermal conductivity and its dimensional relationship with heat-transfer rate.
Importance
Thermal conductivity is used to select insulation, building materials, heat exchangers and materials for thermal management.
Unit Analysis
W/(m·K) means that the material's thermal conductivity is expressed as heat-transfer power per metre of thickness and per kelvin of temperature difference.
Common Mistakes
Confusing thermal conductivity with thermal conductance, which depends on geometry.
Omitting the metre in the unit.
Assuming conductivity is independent of temperature and material structure.
Ignoring the negative sign in Fourier's law, which indicates heat flows down the temperature gradient.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC, Compendium of Chemical Terminology
- NIST, Guide for the Use of the International System of Units (SP 811)
- ISO 8301, Thermal insulation — Determination of steady-state thermal resistance and related properties
Suggest a correction or source · More in Conversions & Equivalences