Thermal expansion describes the change in a material's dimensions or volume as its temperature changes. The linear expansion coefficient describes fractional change in length per unit temperature change, while the volumetric expansion coefficient describes fractional change in volume per unit temperature change. Their SI units are K⁻¹. Because a temperature interval of 1 K is equal in magnitude to an interval of 1 °C, the numerical values of coefficients expressed in K⁻¹ and °C⁻¹ are identical for temperature differences. However, absolute Celsius and kelvin temperatures are not interchangeable in equations that use absolute temperature.
Thermal Expansion Coefficients and Reciprocal Temperature Units
Explains thermal expansion coefficients and the equivalence of reciprocal kelvin and reciprocal degree Celsius units.
α = ΔL/(L₀ΔT); β = ΔV/(V₀ΔT)
Explanation
Variables
Α
Linear thermal expansion coefficient, in K⁻¹
Β
Volumetric thermal expansion coefficient, in K⁻¹
ΔL
Change in length
L₀
Initial length
ΔV
Change in volume
V₀
Initial volume
ΔT
Temperature change, in K or °C
Example or application
A metal has a linear expansion coefficient of 15 × 10⁻⁶ K⁻¹. The same coefficient can be written as 15 × 10⁻⁶ °C⁻¹ when calculating expansion from a temperature difference measured in degrees Celsius.
Definition
A thermal expansion coefficient is a measure of fractional dimensional or volumetric change per unit change in temperature.
Purpose
To explain the reciprocal-temperature units used for thermal expansion coefficients and their numerical equivalence.
Importance
These coefficients are important in structural design, bridges, pipelines, precision instruments and material engineering.
Conversion Rules
1 K⁻¹ and 1 °C⁻¹ have identical numerical magnitudes when applied to temperature intervals.
A coefficient of 12 × 10⁻⁶ K⁻¹ is numerically 12 × 10⁻⁶ °C⁻¹.
Do not convert an absolute temperature using this equivalence; it applies to temperature differences.
For isotropic solids under suitable approximations, volumetric expansion coefficient β is approximately 3α.
Common Mistakes
Treating K⁻¹ as a temperature unit rather than a reciprocal-temperature unit.
Applying the equivalence to absolute temperatures instead of temperature intervals.
Confusing linear and volumetric expansion coefficients.
Assuming β = 3α is exact for all materials and conditions.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC, Compendium of Chemical Terminology
- BIPM, The International System of Units (SI Brochure)
- NIST, Guide for the Use of the International System of Units (SP 811)
Suggest a correction or source · More in Conversions & Equivalences