Standard temperature and pressure, commonly abbreviated STP, is not a single universal condition used by every scientific discipline. Different organisations and textbooks have adopted different reference temperatures and pressures. The IUPAC standard pressure is 100 kPa. A commonly used modern STP convention is 273.15 K and 100 kPa. Older textbooks frequently use 273.15 K and 1 atm (101.325 kPa). Some other reference conditions, such as 25 °C and 1 bar, are used in particular fields but should not automatically be called STP. Because gas volume depends on temperature and pressure, the convention must always be stated.
Standard Temperature and Pressure: Different Convention Definitions
Explains why standard temperature and pressure can have different numerical definitions across scientific and industrial conventions.
Vₘ = RT/p
Explanation
Variables
Vₘ
Ideal-gas molar volume
R
Universal gas constant
T
Reference temperature in K
P
Reference absolute pressure
Example or application
One mole of an ideal gas occupies approximately 22.711 L at 273.15 K and 100 kPa, but approximately 22.414 L at 273.15 K and 1 atm. The difference arises from the pressure convention, not from a change in the amount of gas.
Definition
STP is a reference condition for temperature and pressure used to compare gas properties, with its exact numerical values depending on the stated convention.
Purpose
To identify the reference conditions behind gas-volume values and avoid ambiguity in chemical calculations.
Importance
Different STP conventions produce different gas molar volumes, so identifying the convention is necessary for accurate comparisons.
Convention Comparison
| Convention | Temperature | Pressure | Ideal Molar Volume |
|---|---|---|---|
IUPAC standard pressure with 0 °C reference temperature | 273.15 K | 100 kPa | Approximately 22.711 L/mol |
Older textbook convention | 273.15 K | 1 atm = 101.325 kPa | Approximately 22.414 L/mol |
Common room-temperature reference condition | 298.15 K | 100 kPa | Approximately 24.790 L/mol |
Common Mistakes
Assuming every textbook uses the same STP definition.
Confusing standard pressure with standard atmospheric pressure.
Using 22.4 L/mol without checking the stated conditions.
Calling 25 °C and 1 bar STP without identifying the convention.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC, Compendium of Chemical Terminology
- IUPAC, Standard Pressure Recommendations
- NIST Chemistry WebBook
Suggest a correction or source · More in Conversions & Equivalences