The molar volume of an ideal gas is obtained by dividing the universal gas constant multiplied by absolute temperature by absolute pressure. The value is not fixed: increasing temperature at constant pressure increases molar volume, while increasing pressure at constant temperature decreases it. The pressure and volume units must match the selected gas constant. If temperature is given in Celsius, convert it to kelvin before calculation. The ideal-gas result is an approximation for real gases, whose behaviour may require a compressibility factor or a more detailed equation of state.
Ideal Gas Molar Volume at Specified Conditions
Explains how to calculate ideal-gas molar volume for a particular temperature and pressure.
Vₘ = RT/p
Explanation
Variables
Vₘ
Molar volume
R
Universal gas constant
T
Absolute temperature in K
P
Absolute pressure
Example or application
Calculate ideal-gas molar volume at 298.15 K and 100 kPa using R = 8.314462618 L·kPa/(mol·K): Vₘ = (8.314462618 × 298.15)/100 ≈ 24.790 L/mol.
Definition
Ideal-gas molar volume is the volume occupied by one mole of an ideal gas at a specified absolute temperature and pressure.
Purpose
To calculate the molar volume of an ideal gas under defined conditions.
Importance
It supports gas-volume conversions, reaction calculations and comparison of gas properties at different reference conditions.
Conversion Rules
Convert Celsius temperature to kelvin.
Use absolute pressure.
Use a compatible gas constant.
For a real gas, a compressibility correction may be required: Vₘ = ZRT/p.
Common Mistakes
Treating 22.4 L/mol as valid at every temperature and pressure.
Using Celsius directly in the formula.
Using an incompatible gas constant.
Ignoring real-gas deviations at conditions where they matter.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC, Compendium of Chemical Terminology
- NIST Chemistry WebBook
- NIST, CODATA Recommended Values of the Fundamental Physical Constants
Suggest a correction or source · More in Conversions & Equivalences