Concentration describes how much of a solute is present in a specified amount of solution or solvent. Different concentration units are selected according to the measurement purpose, required precision, chemical application, and physical properties of the mixture. Common expressions include mass concentration, mass fraction, mass percentage, volume percentage, mass-by-volume percentage, molarity, molality, normality, mole fraction, and trace concentration units such as parts per million (ppm) and parts per billion (ppb). These expressions are not interchangeable without considering their definitions and the quantities used in their denominators.
Introduction to Concentration Units and Solution Measurements
Introduces the principal ways of expressing the amount of dissolved substance relative to a solution or solvent.
Mass concentration: ρ = mₛ/Vₛₒₗᵤₜᵢₒₙ
Molarity: c = nₛ/Vₛₒₗᵤₜᵢₒₙ
Molality: b = nₛ/mₛₒₗᵥₑₙₜ
Mass fraction: w = mₛ/mₛₒₗᵤₜᵢₒₙ
Mole fraction: xₛ = nₛ/nₜₒₜₐₗ
Explanation
Variables
Mₛ
Mass of solute.
Vₛₒₗᵤₜᵢₒₙ
Total volume of solution.
Nₛ
Amount of substance of solute in moles.
Mₛₒₗᵥₑₙₜ
Mass of solvent.
Mₛₒₗᵤₜᵢₒₙ
Total mass of solution.
Nₜₒₜₐₗ
Total amount of substance of all components.
Example or application
A solution containing 5 g of dissolved substance in a final solution volume of 1 L has a mass concentration of 5 g/L. Its molarity cannot be determined without knowing the solute's molar mass.
Definition
Concentration is a quantitative measure of the composition of a mixture, usually expressed as the amount of a specified component divided by the amount of solution or solvent.
Purpose
Provides a consistent mathematical basis for preparing, comparing, analyzing, and converting solution compositions.
Importance
Correct concentration expressions are essential in analytical chemistry, medicine, environmental monitoring, industrial formulation, laboratory preparation, and chemical reaction calculations.
Concentration Units
| Name | Common Units |
|---|---|
Mass concentration | g/L, mg/L, kg/m³ |
Molarity | mol/L, mol/m³, mmol/L |
Molality | mol/kg |
Mass percentage | % |
Volume percentage | % (v/v) |
Trace concentration | ppm, ppb, ppt |
Conversion Principles
Identify whether the denominator represents solution volume, solvent mass, total mixture mass, or total moles.
Convert prefixes using powers of ten.
Use molar mass when converting between mass-based and amount-of-substance-based concentrations.
Consider solution density when converting between mass-based and volume-based expressions.
For ppm and ppb, establish whether the expression is mass-based, volume-based, or mole-based.
Common Mistakes
Treating molarity and molality as identical.
Using solvent volume instead of final solution volume for molarity.
Assuming every ppm value automatically means mg/L.
Converting mass percentage to molarity without considering density and molar mass.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC Gold Book
- IUPAC Green Book
- NIST Guide to SI
Suggest a correction or source · More in Conversions & Equivalences