✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-370

Milligrams per Litre and Parts per Million: Aqueous Solution Equivalence

Explains when milligrams per litre can be approximated by parts per million in dilute aqueous solutions.

  • ppm (mass) = mass of solute / mass of solution × 10⁶

  • ppm ≈ mg/L when solution density ≈ 1 kg/L

  • ppm = (mg/L) / (ρ in kg/L)

Explanation

For dilute aqueous solutions with a density close to 1 kg/L, a concentration of 1 mg/L is approximately equal to 1 ppm by mass. The approximation works because one litre of such a solution has a mass close to one kilogram, which contains one million milligrams. However, mg/L is a mass-per-volume unit, whereas mass-based ppm is a mass fraction multiplied by one million. Their numerical equivalence is not universal and depends on solution density. For solutions with significantly different density, the density must be included in the conversion.

Variables

Ppm

Mass-based parts per million.

Mg/L

Mass concentration in milligrams per litre.

Ρ

Solution density expressed in kilograms per litre.

Example or application

A dilute aqueous solution containing 4 mg/L of a substance and having a density of approximately 1 kg/L has a concentration of approximately 4 ppm by mass.

Definition

The approximate equivalence between mg/L and mass-based ppm in dilute aqueous solutions of density approximately 1 kg/L.

Purpose

Connects common water-analysis concentration units with dimensionless mass-fraction expressions.

Importance

This relationship is widely used in drinking-water analysis, environmental chemistry, and dilute aqueous laboratory measurements.

Conditions

  • The solution should be sufficiently dilute.

  • Its density should be known or reasonably close to 1 kg/L.

  • The ppm value must refer to mass fraction, not volume fraction or mole fraction.

Density Correction Example

If a solution has a density of 1.20 kg/L and contains 12 mg/L of solute, its approximate mass concentration is 12 ÷ 1.20 = 10 ppm by mass.

Common Mistakes

  • Treating mg/L and ppm as exactly equivalent for every liquid.

  • Ignoring solution density when it differs significantly from 1 kg/L.

  • Using a volume-based ppm definition when a mass-based definition is intended.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • IUPAC Gold Book
  • Standard Water Analysis Methods
  • NIST Guide to SI

Suggest a correction or source · More in Conversions & Equivalences