Normality is a concentration expression based on the number of equivalents of a reactive species per litre of solution. Its numerical value depends on the reaction being considered because the equivalent factor can change with the chemical reaction. For an appropriately defined reaction, normality equals molarity multiplied by the equivalence factor. In acid-base reactions, the factor depends on the number of transferable protons or hydroxide ions per formula unit. In redox reactions, it depends on the number of electrons transferred per reacting species. Because normality is reaction-dependent, molarity is generally preferred for unambiguous concentration reporting.
Normality and Equivalent Concentration Relationship
Explains normality as the number of chemical equivalents per litre of solution and its relationship to molarity.
N = equivalents/V(L)
N = c × fₑq
Equivalent mass = molar mass/fₑq
Explanation
Variables
N
Normality or equivalent concentration in eq/L.
C
Molar concentration in mol/L.
Fₑq
Equivalence factor for the specified reaction.
V
Solution volume in litres.
Example or application
For complete neutralization, a 0.50 mol/L H₂SO₄ solution has an equivalent concentration of 0.50 × 2 = 1.0 eq/L, or 1.0 N.
Definition
Normality is the equivalent concentration of a specified reactive species, expressed as chemical equivalents per litre of solution.
Purpose
Expresses reactive capacity in calculations where chemical equivalents are useful.
Importance
Normality has historically been used in acid-base titrations, redox titrations, and precipitation analysis.
Reaction Dependence
For complete neutralization, H₂SO₄ can provide two proton equivalents per mole, so its equivalent factor is 2.
For an acid-base reaction involving only one proton per molecule, the factor may be 1.
For redox reactions, the factor is determined by the number of electrons transferred in the specified reaction.
Limitations
Normality cannot be assigned unambiguously without specifying the reaction.
The equivalence factor may differ between reactions.
Always state the reaction context when using normality.
Common Mistakes
Assuming every substance has one equivalent per mole.
Treating normality as an intrinsic concentration independent of reaction.
Using an incorrect proton or electron transfer factor.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- IUPAC Gold Book
- IUPAC Green Book
- Standard Analytical Chemistry Textbooks
Suggest a correction or source · More in Conversions & Equivalences