The milligray is a submultiple of the gray. Since the SI prefix milli represents 10⁻³, one milligray equals 0.001 gray. To convert mGy into Gy, divide the numerical value by 1000. The result remains an absorbed-dose measurement and should not be confused with a sievert-based radiation protection quantity.
Milligray and Gray Conversion
Converts absorbed dose from milligray into gray by dividing by 1000.
1 mGy = 0.001 Gy
D(Gy) = D(mGy)/1000
Explanation
Variables
D(m Gy)
Absorbed dose in milligrays.
D(Gy)
Absorbed dose in grays.
Example or application
Convert 250 mGy into Gy: 250/1000 = 0.25 Gy.
Definition
Milligray-to-gray conversion changes an absorbed-dose measurement from thousandths of a gray into grays.
Purpose
Expresses small absorbed-dose values in the SI-derived gray unit.
Importance
It is useful in scientific reporting, dosimetry calculations, and interpretation of radiation measurements.
Conversion Steps
Record the absorbed dose in mGy.
Divide by 1000.
Express the result in Gy.
Check that the numerical value becomes smaller.
Additional Examples
| Input | Calculation | Result |
|---|---|---|
50 mGy | 50/1000 | 0.05 Gy |
1250 mGy | 1250/1000 | 1.25 Gy |
Common Mistakes
Multiplying instead of dividing.
Confusing mGy with mSv.
Assuming that absorbed dose and effective dose have identical meanings.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM SI Brochure
- ICRU Reports
- NIST Special Publication 811
Suggest a correction or source · More in Conversions & Equivalences