The gray is the SI unit of absorbed dose, while the rad is an older non-SI unit. One rad is defined as 0.01 joule per kilogram, while one gray equals one joule per kilogram. Therefore, one gray equals exactly 100 rad. To convert Gy into rad, multiply by 100. This conversion applies to absorbed dose only and does not directly convert gray into sievert.
Gray and Rad Conversion
Converts absorbed dose from gray into rad using the exact relationship between the SI and traditional units.
1 Gy = 100 rad
D(rad) = D(Gy) × 100
Explanation
Variables
D(Gy)
Absorbed dose in grays.
D(rad)
Absorbed dose in rads.
Example or application
Convert 0.4 Gy into rad: 0.4 × 100 = 40 rad.
Definition
Gray-to-rad conversion expresses absorbed energy per unit mass in the traditional rad unit.
Purpose
Converts SI absorbed-dose values into the traditional radiation unit rad.
Importance
The conversion is useful when interpreting older scientific, medical, and radiation-protection literature.
Conversion Steps
Identify the absorbed dose in Gy.
Multiply by 100.
Express the result in rad.
Confirm that the quantity being converted is absorbed dose.
Additional Examples
| Input | Calculation | Result |
|---|---|---|
1 Gy | 1 × 100 | 100 rad |
2.5 Gy | 2.5 × 100 | 250 rad |
Common Mistakes
Using a factor of 10 instead of 100.
Confusing rad with rem.
Assuming rad and sievert measure the same radiation quantity.
Sources and verification
Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.
- BIPM SI Brochure
- ICRU Reports
- NIST Special Publication 811
Suggest a correction or source · More in Conversions & Equivalences