✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-466

Groundwater Hydraulic Conductivity: Metres per Second and Other Time-Based Units

Explains conversion of hydraulic conductivity between metres per second and other time-based units.

K(m/day) = K(m/s) × 86400

Explanation

Hydraulic conductivity describes how readily a porous material transmits water under a hydraulic gradient. Its SI unit is metres per second (m/s). Geological and hydrogeological reports may also use metres per day (m/day), centimetres per second (cm/s), or other compatible length-per-time units. To convert m/s into m/day, multiply by 86400. To convert m/day into m/s, divide by 86400. Hydraulic conductivity depends on the porous material and fluid properties, so the converted value does not eliminate the need to state temperature or other relevant measurement conditions.

Variables

K(m/day)

Hydraulic conductivity in metres per day.

K(m/s)

Hydraulic conductivity in metres per second.

Example or application

Convert 2 × 10⁻⁵ m/s to m/day. K = 2 × 10⁻⁵ × 86400 = 1.728 m/day.

Definition

Hydraulic-conductivity conversion expresses the same conductivity value using different length-per-time units.

Purpose

To compare hydrogeological measurements reported using different time bases.

Importance

Consistent conductivity units are essential in groundwater-flow models and aquifer assessments.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • USGS Groundwater Resources
  • Freeze and Cherry, Groundwater
  • Hydrogeology textbooks

Suggest a correction or source · More in Conversions & Equivalences