✦ScienexySCIENCE KNOWLEDGE LIBRARY
conversion · SCI-REF-009-485

Radians and Degrees Conversion

Learn the step-by-step methods for converting angular measurements from radians to degrees and from degrees to radians.

Explanation

Learning Objective

Perform accurate two-way conversions between radians and degrees using the exact relationship π radians = 180 degrees.

Core Concept

Radians and degrees are interchangeable representations of plane angles. The conversion uses π/180 for degrees-to-radians and 180/π for radians-to-degrees.

Scientific Background

The radian is the coherent SI-derived unit for plane angle. It is defined as the ratio of arc length to radius and is dimensionless in the SI system, although the symbol rad is used to identify the quantity as an angle. Degrees remain common in navigation, geometry, and everyday angle measurements.

Unit Information

Source Unit

Degree (°) or radian (rad)

Target Unit

Radian (rad) or degree (°)

Exact Relationship

180° = π rad

Unit Relationship

1° = π/180 rad; 1 rad = 180/π°

Conversion Principle

Multiply a degree value by π/180 to obtain radians. Multiply a radian value by 180/π to obtain degrees.

Conversion Formula

  • θ(rad) = θ(°) × π/180

  • θ(°) = θ(rad) × 180/π

Conversion Method

  • Determine whether the starting angle is in degrees or radians.

  • Select the corresponding conversion formula.

  • Substitute the angle into the formula.

  • Cancel common factors before calculating when possible.

  • Keep π in the exact answer unless a decimal approximation is required.

  • Check whether the converted angle represents the same portion of a full revolution.

Worked Examples

ProblemCalculationAnswerExplanation

Convert 45° into radians.

45 × π/180 = π/4

π/4 rad

The degree value is multiplied by π/180 and simplified.

Convert 120° into radians.

120 × π/180 = 2π/3

2π/3 rad

Dividing 120 by 180 produces 2/3, leaving 2π/3 radians.

Convert 2 radians into degrees.

2 × 180/π ≈ 114.5916

Approximately 114.59°

The radian value is multiplied by 180/π. The decimal result is approximate because π is irrational.

Convert 5π/6 radians into degrees.

(5π/6) × 180/π = 150

150°

The π terms cancel, and 180 divided by 6 is 30; multiplying by 5 gives 150 degrees.

Verification

Convert the result back into the original unit. The recovered angle should equal the starting value, apart from any stated rounding.

Common Mistakes

  • Multiplying by π/180 when converting radians into degrees.

  • Multiplying by 180/π when converting degrees into radians.

  • Cancelling π incorrectly.

  • Rounding an exact fractional multiple of π too early.

  • Entering an angle into a calculator using the wrong angular mode.

Practical Applications

  • Solving trigonometric equations.

  • Calculating angular displacement in physics.

  • Using calculus functions involving angles.

  • Converting engineering and navigation measurements.

  • Interpreting circular motion and rotation.

Knowledge Check

QuestionAnswerExplanation

Convert 225° into radians.

5π/4 rad

225 × π/180 = 5π/4.

Convert 7π/4 radians into degrees.

315°

(7π/4) × 180/π = 315°.

Example or application

A worked example has not yet been added.

Importance

Accurate conversion between radians and degrees is essential for trigonometry, calculus, rotational physics, and engineering calculations.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Conversions & Equivalences