Learning Objective
Select appropriate conversion factors by identifying the original unit, target unit and exact or approximate relationship between them.
Core Concept
A conversion factor is a ratio of two equivalent quantities. Its orientation determines whether the numerical value is multiplied or divided.
Scientific Background
A valid conversion factor represents a ratio equal to one because its numerator and denominator describe the same quantity in different units. For example, 1 km / 1,000 m and 1,000 m / 1 km are both valid conversion factors.
Unit Relationship
1 km = 1,000 m
Conversion Principle
Choose the orientation of the conversion factor so that the original unit appears in the denominator and cancels with the original measurement unit, leaving the target unit.
Conversion Formula
Converted value = Original value × (Target unit equivalent / Original unit equivalent)
Variables
Original value
The numerical value of the starting measurement.
Target unit equivalent
The equivalent quantity expressed in the desired unit.
Original unit equivalent
The corresponding quantity expressed in the starting unit.
Conversion Factor Selection
Identify the original measurement unit.
Identify the required target unit.
Find an established relationship connecting the two units.
Write the relationship as a fraction in both possible orientations.
Select the orientation that cancels the original unit.
Check whether the resulting unit is the target unit.
Worked Examples
| Problem | Available Relationship | Selected Conversion Factor | Calculation | Answer | Explanation |
|---|---|---|---|---|---|
Convert 4 kilometres into metres. | 1 km = 1,000 m | 1,000 m / 1 km | 4 km × (1,000 m / 1 km) = 4,000 m | 4,000 m | The kilometre unit cancels because it appears in both the original measurement and the denominator of the conversion factor. |
Convert 750 millilitres into litres. | 1 L = 1,000 mL | 1 L / 1,000 mL | 750 mL × (1 L / 1,000 mL) = 0.75 L | 0.75 L | The millilitre unit cancels, leaving litres. |
Selection Considerations
Use exact defined relationships whenever available.
Check whether the conversion factor applies to the correct measurement system.
Distinguish US customary units from Imperial units where their definitions differ.
For temperature, use the appropriate conversion equation rather than a simple multiplicative factor.
For density-dependent equivalences, verify the relevant material or solution density.
Common Mistakes
Selecting a conversion factor in the wrong orientation.
Using an Imperial conversion factor for a US customary measurement.
Assuming every conversion is a simple multiplication.
Using an approximate relationship as though it were exact.
Ignoring the physical conditions attached to a conversion.
Practical Applications
Laboratory measurement conversion.
Engineering calculations.
International measurement comparisons.
Scientific data processing.
Checking formulas and numerical results.
Knowledge Check
| Question | Answer | Explanation |
|---|---|---|
Which conversion factor should be used to convert metres into kilometres? | 1 km / 1,000 m | The metre unit must appear in the denominator so that it cancels with the original measurement. |
Source
NIST Special Publication 811
BIPM - The International System of Units (SI Brochure)
OpenStax - College Physics