Learning Objective
Distinguish exact mathematical and defined relationships from measured or approximate conversion values.
Core Concept
Not every conversion factor has the same status. Some relationships are exact by definition, while others depend on experimental measurements or physical conditions.
Scientific Background
The SI system defines several units and constants using exact numerical values. Other scientific quantities are determined experimentally and carry uncertainty. Correctly identifying these differences is important when reporting precision.
Value Categories
| Category | Description | Example |
|---|---|---|
Exact defined conversion | A conversion relationship established exactly by definition. | 1 inch = 25.4 mm exactly. |
Exact SI relationship | A unit relationship derived from exact SI definitions. | 1 km = 1,000 m exactly. |
Defined physical constant | A physical constant assigned an exact numerical value in the SI system. | The speed of light in vacuum is exactly 299,792,458 m/s. |
Measured physical quantity | A quantity determined experimentally and generally reported with uncertainty. | The measured mass of a particular planet. |
Approximate reference value | A rounded value used for convenient calculations. | π ≈ 3.14. |
Conversion Principle
Use exact relationships without assigning them artificial measurement uncertainty. Use appropriate precision and uncertainty when a conversion depends on measured or condition-dependent quantities.
Worked Examples
| Problem | Calculation | Answer | Explanation |
|---|---|---|---|
Convert 2 inches into millimetres. | 2 × 25.4 = 50.8 mm | 50.8 mm | The inch-to-millimetre relationship is exact by definition. |
Convert 3 miles into kilometres using the international mile. | 3 × 1.609344 = 4.828032 km | 4.828032 km | The international mile is defined as exactly 1,609.344 metres. The displayed digits do not automatically imply that a measured value of 3 miles has six significant figures. |
Use an approximate value of π to calculate the circumference of a circle with radius 1 m. | C = 2πr ≈ 2 × 3.14 × 1 = 6.28 m | Approximately 6.28 m | The result is approximate because 3.14 is an approximation of π. |
Important Considerations
An exact conversion factor does not make an experimentally measured input exact.
A defined constant may have an exact value in a specified unit system.
Measured physical constants may have uncertainty.
Approximate values should be identified with symbols such as ≈ or wording such as approximately.
The precision of a reported result must reflect the input measurements and calculation.
Common Mistakes
Treating approximate values as exact.
Assigning uncertainty to an exact defined relationship without justification.
Assuming every physical constant has an exact value.
Confusing a definition with an experimental measurement.
Reporting excessive precision from a rounded reference value.
Practical Applications
Scientific calculations.
Metrology and calibration.
Physics constant calculations.
Engineering design.
Technical reference tables.
Knowledge Check
| Question | Answer | Explanation |
|---|---|---|
Is 1 kilometre equal to 1,000 metres exactly or approximately? | Exactly. | The kilometre is defined as 1,000 metres. |
Source
BIPM - The International System of Units (SI Brochure)
NIST Special Publication 811
CODATA - Recommended Values of the Fundamental Physical Constants