Learning Objective
Apply suitable rounding rules and communicate converted measurements clearly without losing important information.
Core Concept
Rounding reduces the number of reported digits while keeping the result sufficiently close to the calculated value.
Scientific Background
Scientific results often contain more digits after calculation than are appropriate for reporting. Rounding rules help present results consistently while avoiding unnecessary numerical precision.
Common Rounding Rules
| Rule | Description | Example |
|---|---|---|
Digit less than 5 | In ordinary rounding, retain the preceding digit and discard the following digits. | 3.142 rounded to two decimal places becomes 3.14. |
Digit greater than 5 | Increase the retained final digit by one. | 3.147 rounded to two decimal places becomes 3.15. |
Digit exactly 5 | The chosen rounding convention must be specified. Round-half-up and round-half-to-even are commonly used conventions. | 2.5 rounded to the nearest integer becomes 3 under round-half-up and 2 under round-half-to-even. |
Conversion Principle
Retain sufficient digits during intermediate calculations and round the final reported result according to the measurement precision, uncertainty and applicable reporting convention.
Worked Examples
| Problem | Calculation | Answer | Explanation |
|---|---|---|---|
Convert 5 miles into kilometres using 1 mile = 1.609344 km, then round to two decimal places. | 5 × 1.609344 = 8.04672 km | 8.05 km | The calculated value is rounded to two decimal places. If 5 miles is an imprecise measured value, its significant figures must also be considered. |
Convert 2500 metres into kilometres. | 2500 ÷ 1000 = 2.5 km | 2.5 km | The conversion is exact, but the intended precision of the original measurement should be considered when reporting it. |
Reporting Guidelines
Always include the unit after the numerical result.
Use scientific notation when it clarifies significant figures.
Avoid unnecessary rounding during intermediate calculations.
State whether a value is exact or approximate.
Use a consistent decimal and significant-figure convention.
Report uncertainty where the measurement context requires it.
Common Mistakes
Rounding at every intermediate step.
Confusing decimal places with significant figures.
Removing meaningful trailing zeros.
Failing to state the rounding convention when it matters.
Reporting more digits than the measurement supports.
Practical Applications
Scientific laboratory reports.
Engineering specifications.
Technical publications.
Statistical data reporting.
Measurement conversion tables.
Knowledge Check
| Question | Answer | Explanation |
|---|---|---|
Round 12.678 to two decimal places. | 12.68 | The third decimal digit is 8, so the second decimal digit increases by one. |
Source
NIST Special Publication 811
NIST Technical Note 1297
BIPM - The International System of Units