Learning Objective
Understand the construction, operating principle and appropriate use of laboratory centrifuges: basic types and uses.
Definition
A laboratory centrifuge separates components of a sample by rotating them at high speed so that differences in sedimentation behavior produce spatial separation.
Scientific Background
Rotation creates radial acceleration that drives particles or phases according to density, size, shape, viscosity and rotor speed. Centrifugation is commonly described using relative centrifugal force (RCF), which depends on rotational speed and rotor radius; rpm alone does not specify the force experienced by a sample.
Instrument Information
Instrument Name
Laboratory Centrifuges
Category
General laboratory equipment
Typical Purpose
A laboratory centrifuge separates components of a sample by rotating them at high speed so that differences in sedimentation behavior produce spatial separation.
Main Components Or Features
Motor and drive system
Rotor and sample holders
Lid and safety interlock
Speed and time controls
Optional temperature control
Working Principle
Principle
Rotation creates radial acceleration that drives particles or phases according to density, size, shape, viscosity and rotor speed. Centrifugation is commonly described using relative centrifugal force (RCF), which depends on rotational speed and rotor radius; rpm alone does not specify the force experienced by a sample.
Operation
Select a centrifuge and rotor rated for the sample and required force; use compatible tubes; balance opposing loads according to the manufacturer's instructions; close the lid; set validated speed, force and time; wait for the rotor to stop before opening.
Types Or Configurations
Fixed-angle rotors
Swinging-bucket rotors
Microcentrifuges
Refrigerated centrifuges
Low-speed and high-speed laboratory centrifuges
Advantages
Efficiently separates suspended components
Supports a broad range of sample volumes and separation goals
Specialized rotors enable different sedimentation geometries
Limitations
Incorrect balancing or rotor use can cause equipment failure
Heat generation may affect temperature-sensitive samples
Separation depends on sample properties and operating conditions
Practical Applications
Cell and organelle fractionation
Precipitate collection
Blood component separation in suitable clinical systems
Sample clarification
Safe Use And Quality Considerations
Never open the lid until the rotor has completely stopped; inspect rotors and tubes and follow the rated limits.
Knowledge Check
| Question | Answer | Explanation |
|---|---|---|
What is the main purpose of laboratory centrifuges: basic types and uses? | A laboratory centrifuge separates components of a sample by rotating them at high speed so that differences in sedimentation behavior produce spatial separation. | Select a centrifuge and rotor rated for the sample and required force; use compatible tubes; balance opposing loads according to the manufacturer's instructions; close the lid; set validated speed, force and time; wait for the rotor to stop before opening. |
Why should laboratory equipment be inspected before use? | Inspection helps identify damage, contamination or conditions that could compromise safety or measurement quality. | Cracks, residues, worn seals and damaged electrical parts can cause sample loss, inaccurate results or hazards. |
Equations And Relationships
Relative Centrifugal Force
RCF = 1.118 × 10⁻⁵ × r × (rpm)², where r is rotor radius in centimetres and rpm is revolutions per minute.