Learning Objective
Explain the general scanning-probe concept and compare common probe–sample interaction modes.
General Components
Sharp probe or tip
Scanner for controlled relative motion
Feedback controller
Interaction sensor
Data acquisition and image-processing system
Working Principle
The probe is brought close enough to the surface for a measurable interaction to occur. The system scans across the sample while monitoring or controlling a selected interaction. The recorded signal is converted into a spatial map.
Major Methods
| Method | Interaction | Typical output |
|---|---|---|
Atomic force microscopy | Interatomic forces between tip and sample | Surface topography and selected mechanical or electrical properties |
Scanning tunneling microscopy | Quantum tunneling current between conductive tip and sample | Atomic-scale surface electronic/topographic information under suitable conditions |
Strengths
Can provide nanoscale spatial information
Can operate in several environments depending on method
Can measure properties beyond optical appearance
Limitations
Tip shape affects apparent feature dimensions.
Scan speed and field of view are often limited.
Surface contamination, drift, vibration, and feedback settings affect data.
Different modes measure different physical quantities and should not be conflated.
Applications
Nanotechnology
Surface science
Thin films and coatings
Semiconductor research
Local mechanical and electrical characterization
Knowledge Check
What is the role of the probe?
Why can a blunt or contaminated tip distort measured feature size?