Learning Objective
Describe AFM components, operating modes, feedback, and the meaning of an AFM image.
Components
Sharp tip attached to a flexible cantilever
Laser and position-sensitive photodetector in many optical-lever designs
Piezoelectric scanner
Feedback controller
Vibration-isolation system
Data acquisition software
Working Principle
As the tip interacts with the surface, cantilever deflection, oscillation amplitude, phase, or frequency may change. A feedback system adjusts the vertical position to maintain a chosen setpoint while the probe scans laterally.
Common Modes
| Mode | Description |
|---|---|
Contact | The tip remains in contact with the surface; useful for some robust samples but may create lateral forces. |
Tapping or intermittent-contact | The cantilever oscillates and briefly interacts with the surface, often reducing lateral forces. |
Non-contact | The cantilever oscillates near the surface and senses longer-range interactions; performance depends strongly on environment and setup. |
Outputs
Height images can represent feedback-controlled vertical motion. Other channels, such as deflection, amplitude, phase, or force curves, represent different signals and need separate interpretation.
Applications
Surface roughness
Nanoparticle dimensions
Thin-film morphology
Local mechanical properties
Biological surfaces under suitable conditions
Limitations
Tip convolution broadens narrow features.
Soft samples may deform under the tip.
Thermal drift, vibration, and feedback artifacts affect images.
A height map is not automatically a chemical composition map.
Knowledge Check
What does the feedback loop control?
Why might tapping mode be preferred for a delicate sample?