✦ScienexySCIENCE KNOWLEDGE LIBRARY
scientific_instrument · SCI-REF-010-146

Atomic Absorption Spectrometer (AAS)

An atomic absorption spectrometer measures the absorption of element-specific radiation by free ground-state atoms to determine elemental concentrations.

Explanation

Learning Objective

Understand the principle, components, sample introduction methods and analytical applications of atomic absorption spectroscopy.

Definition

An atomic absorption spectrometer is an analytical instrument that measures the absorption of characteristic radiation by free atoms, usually generated from a liquid sample.

Scientific Background

A sample is converted into free atoms in an atomization system. Atoms of a particular element absorb radiation at characteristic wavelengths corresponding to electronic transitions.

Components

NameFunction

Element-specific light source

Provides radiation characteristic of the element being measured, commonly using a hollow cathode lamp or an appropriate alternative.

Atomizer

Converts sample constituents into free atoms.

Nebulizer

Converts a liquid sample into an aerosol in flame systems.

Monochromator

Selects the analytical wavelength and reduces unwanted radiation.

Detector

Measures the intensity of transmitted radiation.

Data system

Calculates absorbance and determines concentration using calibration data.

Working Principle

Principle

Element-specific atomic absorption

Explanation

Radiation from an element-specific source passes through a region containing free atoms of the analyte. The atoms absorb characteristic radiation. The decrease in intensity is measured and related to the analyte concentration.

Measurement

Absorbance = log10(I0/I)

Quantification

Concentration is commonly determined using a calibration curve prepared from suitable standards.

Atomization Methods

NameDescription

Flame atomization

Uses a flame to produce free atoms from a nebulized sample.

Electrothermal atomization

Uses an electrically heated graphite furnace to atomize a small sample quantity.

Measurement Procedure

  • Select the element-specific analytical wavelength and lamp.

  • Prepare a blank and suitable calibration standards.

  • Prepare the sample using an appropriate digestion or dilution procedure.

  • Set up the selected atomization system.

  • Measure the blank and calibration standards.

  • Introduce the sample and record absorbance.

  • Determine concentration from the validated calibration relationship.

  • Apply dilution factors and quality-control checks.

Advantages

  • Good element-specific selectivity.

  • Useful for trace and major-element analysis, depending on configuration.

  • Well-established analytical methods are available for many elements.

Limitations

  • Many conventional AAS configurations measure elements sequentially.

  • Chemical and ionization interferences may affect results.

  • Sample digestion may be necessary for solid materials.

  • The method is limited to elements supported by the instrument and suitable analytical conditions.

Applications

  • Trace-metal analysis in water

  • Soil and sediment analysis

  • Food and agricultural testing

  • Pharmaceutical elemental analysis

  • Industrial material testing

  • Environmental monitoring

Maintenance And Safety

  • Follow approved flame and fuel-gas safety procedures.

  • Use appropriate ventilation and exhaust systems.

  • Handle acid digestion reagents using suitable laboratory precautions.

  • Keep burners and sample introduction components clean.

  • Verify calibration using appropriate quality-control samples.

Knowledge Check

QuestionAnswerExplanation

Why is an element-specific lamp used in many AAS instruments?

It provides radiation at wavelengths characteristic of the element being analyzed.

Ground-state atoms of the target element absorb radiation at their characteristic electronic transition wavelengths.

Example or application

A worked example has not yet been added.

Importance

AAS is widely used for elemental analysis because it provides reliable measurements of many metals and selected metalloids in environmental, biological and industrial samples.

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Source verification pending; check an authoritative textbook, university, standards body, or peer-reviewed source.

Suggest a correction or source · More in Scientific Instruments & Methods