Definition
The limit of detection is the lowest analyte level that can be reliably distinguished from an appropriate blank or background signal. The limit of quantification is the lowest level that can be measured with acceptable quantitative performance.
Scientific Background
Analytical instruments produce signals that may include background variation and random noise. At very low analyte concentrations, the analyte response becomes difficult to distinguish from this background.
Key Terms
| Name | Symbol | Description |
|---|---|---|
Limit of Detection | LOD | The lowest level at which the analyte can be detected with a defined statistical or analytical confidence. |
Limit of Quantification | LOQ | The lowest level at which the analyte can be quantified with acceptable accuracy and precision. |
Signal-to-Noise Ratio | S/N | A comparison between the analytical signal and background noise. |
Blank Response | The signal obtained from a sample without the analyte or from an appropriate blank matrix. |
Common Estimation Approaches
| Name | Description |
|---|---|
Signal-to-Noise Approach | Uses the relationship between analyte signal and background noise under a defined method. |
Standard Deviation and Slope Approach | Uses the variability of blank or low-level responses and the calibration relationship. |
Experimental Verification | Evaluates actual low-concentration samples to confirm method performance. |
Formula
Name
Common Statistical Estimates
Expressions
LOD ≈ 3.3σ / S
LOQ ≈ 10σ / S
Variables
Σ
Standard deviation of an appropriate response estimate
S
Slope of the calibration relationship
Note
These are commonly used estimation relationships in suitable validation frameworks, not universal definitions for every analytical method.
Relationship
The LOQ is generally higher than the LOD because quantitative measurement requires more reliable performance than simple detection.
Applications
Trace contaminant analysis
Environmental monitoring
Pharmaceutical impurity testing
Food safety analysis
Analytical method validation
Limitations
LOD and LOQ depend on the analytical method, matrix, instrument, measurement conditions, and statistical approach. They should not be treated as fixed properties of an instrument alone.