Definition
A resistivity meter is an instrument used in geophysical surveys to measure electrical potential differences and current, from which subsurface electrical resistivity can be estimated.
Scientific Background
Different rocks, soils, fluids, and geological structures have different electrical properties. Resistivity depends on mineral composition, porosity, water content, pore-fluid salinity, and temperature.
Components
| Name | Function |
|---|---|
Current electrodes | Introduce electrical current into the ground. |
Potential electrodes | Measure electrical potential differences. |
Power source | Provides the survey current. |
Measurement unit | Records current and voltage. |
Data acquisition system | Stores survey measurements. |
Working Principle
An electrical current is introduced into the ground through current electrodes. The resulting potential difference is measured using potential electrodes. Apparent resistivity is calculated using the measured voltage, current, and a geometric factor determined by the electrode arrangement.
Formula
Name
Apparent resistivity
Expression
ρa = K × (ΔV / I)
Variables
Ρa
Apparent resistivity.
K
Geometric factor determined by electrode arrangement.
ΔV
Measured potential difference.
I
Injected current.
Measurement Units
Ohm metre (Ω·m)
Millivolt (mV)
Ampere (A)
Array Types
| Name | Description |
|---|---|
Wenner array | Uses equally spaced electrodes and is commonly applied in resistivity surveys. |
Schlumberger array | Uses a relatively large separation of current electrodes compared with potential electrodes. |
Dipole-dipole array | Uses separated current and potential electrode pairs and can provide useful lateral sensitivity. |
Accuracy And Limitations
The measured value is apparent resistivity, not necessarily the true resistivity of one layer.
Electrode contact resistance can affect data quality.
Subsurface interpretation is non-unique.
Cultural electrical noise can interfere with measurements.
Practical Applications
Groundwater exploration
Geological layer investigation
Environmental site assessment
Engineering geology
Contamination studies
Subsurface cavity investigation
Maintenance And Safety
Electrical surveys should be conducted by trained personnel.
Follow equipment-specific electrical safety requirements.
Inspect cables, connectors, and electrodes.
Record electrode geometry and field conditions accurately.
Knowledge Check
| Question | Answer |
|---|---|
What two electrical quantities are directly measured in a basic resistivity survey? | Current and potential difference. |
Why is the term apparent resistivity used? | Because the measurement represents the response of a subsurface volume rather than necessarily one uniform material. |